Abstract:A coarse-grained computational fluid dynamics coupled with the discrete element method (CFD-DEM) model, combined with a smoothed voidage algorithm and a multicomponent and multistep pyrolysis scheme, has been developed, validated, and used to study biomass pyrolysis in different-shaped fluidized-bed reactors. Correspondingly, fluidized-bed reactors with three different section shapes (i.e., circular, square, and rectangular sections) and gas inlet areas (i.e., 25, 50, and 100% of the bottom section) were devised to explore the effect of the reactor structure on pyrolysis behavior. The simulation results have been extensively analyzed and discussed by various indicators, such as the gas-solid flow patterns, bubble behaviors, pyrolysis product species, biomass reaction rates, and reactor wall erosion depths. It is found that the circular reactor has the largest mean bed height but the lowest fluctuation frequency. Moreover, the circular reactor generally has the largest bubble equivalent diameter at the same height, followed by the square reactor, and the rectangular reactor provides the smallest bubbles. Regarding the effect of the gas inlet area, the fluctuation frequency monotonically increases with reducing the gas inlet area. The largest gas inlet gives the lowest biomass mass loss rate and the smallest bubble equivalent diameter, whereas the other two smaller gas inlets provide quite similar results. Moreover, decreasing the gas inlet area also generates large bubbles more frequently. Finally, the circular reactor suffers the severest wear, followed by the square and the rectangular reactors. These findings are helpful in optimizing the design and operation of biomass fluidized-bed pyrolysis processes.

A New Solid Flux Controller for the Downer Reactor Engineering Technology

A Reinforcement Learning-Based Temperature Control of Fluidized Bed Reactor in Gas-Phase Polyethylene Process

Downer reactor: From fundamental study to industrial application

Control of Pressure Balance and Solids Circulation Characteristics in DCFB Reactors

CFD simulation of cross flow in multi-tubular fixed-bed reactor of industrial level

Empirical Modelling and Advanced Control of an Industrial Distillation Column

Studies and Applications of Predictive Functional Control in Temperature Tracking of Chemical Reactors

Mathematical Model for Mass and Heat Transfer in Multilevel Reactor for Pyrolysis of Used Tyres

Cocurrent gas-solid downflow fluidized bed. (downer) reactors: I Development and applications

Modeling the hydrodynamics in a coupled high-density downer-to-riser reactor

CFD-DEM Simulation of Flow and Mixing Behavior in Downers with Different Entrance Structures

Design and Development of Hot Model Test Unit of the Downer Reactor

Integrated Gas and Solid Model to Determine the Flow Performance in the SCR Reactor

Study on Hydrodynamics and Mass Transfer Characteristic of a New Gas-liquid Reactor

Experimental Study of the Deep Catalytic Cracking Process in a Downer Reactor

Cocurrent gas-solid downflow fluidized bed (downer) reactors: (III). Gas and solid mixing

Impact of the Reactor Structure on Biomass Pyrolysis in Fluidized-Bed Reactors: A Coarse-Grained CFD-DEM Study

Progress in thermal plasma reactor used for coal pyrolysis to acetylene

From Noise to Information: a New Technology of Olefin Polymerization Fluidized Bed Reactor Based on Acoustic Emission

Research on Inlet and Outlet Configurations of Gas-Solids Cocurrent Downflow Reactors

Computational fluid dynamic modeling of hydrodynamics in downer reactors