Abstract:A k-epsilon-Theta-k(p) model was proposed to describe the complicated two-phase flow in downers, taking into account the fast and dense gas-solid flows in downers, transport phenomena caused by turbulence mechanism and collisions between particles, i.e., a k-epsilon turbulence model for gas phase, a k(p) turbulence model, and a kinetic theory description of solid stresses characterized by pseudo-temperature of particles (Theta) for solid phase. A FORTRAN code was developed to solve the steady-state 3D flow fields of two-phase flows numerically. To validate the reliability of the k-epsilon-Theta-k(p) model, the gas-solid flows in (1) the developing and fully developed regions of a downer (140 mm ID) and (2) solids jet development in the entrance region of a downer (92 mm ID) were simulated. The predicted results had satisfactory agreement with a large quantity of experimental data, i.e., axial and radial distributions of local solids fraction, local particle velocity, and pressure. In particular, the above model and corresponding simulations were also implemented successfully using CFX 4.2/4.3, a commercial software developed by AEA Technology Company. Furthermore, the CFX code was applied to predict the radial flow structure in a downer of 418 mm ID, which was validated by the ongoing experiments in the corresponding experimental setup. Further analysis of the simulated data also showed that the diffusion coefficient of particles is strongly correlated with the local solids fraction. A lower solids fraction corresponds to a larger radial diffusion coefficient. With the increase of solids fraction, the diffusion coefficient decreases sharply when the solids fraction is less than 0.05, and then levels off. This means that the local solids fraction has an important effect on the dispersion behavior of particles. This predicted result gives reasonable agreement with the experimental results in the literature.

Design and Development of Hot Model Test Unit of the Downer Reactor

Cocurrent gas-solid downflow fluidized bed (downer) reactors: II hydrodynamics

Experimental Study on Gas–solid Flow and Heat Transfer Characteristics in Downer Moving Bed

Numerical Simulation of Hydrodynamics in Downers Using a CFD–DEM Coupled Approach

Cocurrent gas-solid downflow fluidized bed. (downer) reactors: I Development and applications

CFD-DEM Simulation of Flow and Mixing Behavior in Downers with Different Entrance Structures

Cocurrent gas-solid downflow fluidized bed (downer) reactors: (III). Gas and solid mixing

DOWNER ENTRANCE STRUCTURE BASED ON STRONG TURBULENCE DISPERSION

Modeling the hydrodynamics of downer reactors based on kinetic theory

Novel Design And Modeling Of A Coupled High-Density Downer-Riser Reactor

Study on Radial Solid-Fraction Profiles in Large-Scale Downer Reactor

Solids Axial and Radial Mixing Behavior in Downer with Gas Jet in Reverse Direction

Computational fluid dynamic modeling of hydrodynamics in downer reactors

Fundamental Studies on the Hydrodynamics and Mixing of Gas and Solid in A Downer Reactor

Downer reactor: From fundamental study to industrial application

CFD simulation of hydrodynamics in downer reactors

Axial flow structure at the varying superficial gas velocity in a downer reactor

Axial Flow Pattern in a Concurrent Downflow Fluidized Bed (downer) with Linearly Variable Superficial Gas Velocity

Research on Inlet and Outlet Configurations of Gas-Solids Cocurrent Downflow Reactors

Structure Design and Optimization of the Mass Flow Distribution Device of Downcomer for Fluoride-Salt-Cooled High-Temperature Advanced Reactor – FuSTAR

Simulation Research of Fast Mixing Process of Ultra-high Flow Rate in DeNox Reactor of Thermal Power Station