Abstract:This article investigates an improved 4H-SiC trench gate metal–oxide–semiconductor field-effect transistor (MOSFET) (UMOSFET) fitted with a super-junction (SJ) shielded region. The modified structure is composed of two n-type conductive pillars, three p-type conductive pillars, an oxide trench under the gate, and a light n-type current spreading layer (NCSL) under the p-body. The n-type conductive pillars and the light n-type current spreading layer provide two paths to and promote the diffusion of a transverse current in the epitaxial layer, thus improving the specific on-resistance (R on,sp). There are three p-type pillars in the modified structure, with the p-type pillars on both sides playing the same role. The p-type conductive pillars relieve the electric field (E-field) in the corner of the trench bottom. Two-dimensional simulation (silvaco TCAD) indicates that R on,sp of the modified structure, and breakdown voltage (V BR) are improved by 22.2% and 21.1% respectively, while the maximum figure of merit ( FOM=VBR2/Ron,sp ) is improved by 79.0%. Furthermore, the improved structure achieves a light smaller low gate-to-drain charge (Q gd) and when compared with the conventional UMOSFET (conventional-UMOS), it displays great advantages for reducing the switching energy loss. These advantages are due to the fact that the p-type conductive pillars and n-type conductive pillars configured under the gate provide a substantial charge balance, which also enables the charge carriers to be extracted quickly. In the end, under the condition of the same total charge quantity, the simulation comparison of gate charge and OFF-state characteristics between Gauss-doped structure and uniform-doped structure shows that Gauss-doped structure increases the V BR of the device without degradation of dynamic performance.

Double-self-aligned Short-Channel Power DMOSFETs in 4H-Sic

Optimized JFET Regions of 4H-Sic VDMOS with Reduced On-Resistance and Improved Gate Oxide Reliability

A Fully Self-Aligned SiC Trench MOSFET with 0.5 μm Channel Pitch

Implementation of a short channel (0.3 μm) for 4H-SiC MOSFETs with deep P-well using ‘channeling’ implantation

Improved Blocking and Switching Characteristics of Split-Gate 1.2kV 4H-SiC MOSFET with a Deep P-well

Novel Designed SiC Devices for High Power and High Efficiency Systems

Normally-off trench JFET technology in 4H silicon carbide

Simulation Study of A 1200V 4H-SiC Lateral MOSFET With Reduced Saturation Current

Improved Short-Circuit Ruggedness for 1.2kV 4H-SiC MOSFET Using a Deep P-Well Implemented by Channeling Implantation

A Novel SiC Trench MOSFET with Self-Aligned N-Type Ion Implantation Technique

An Improved Structure to Enhance the Robustness of SiC Power MOSFETs for a Low Ron, Sp

4H-Sic Tapered-Gate MOSFET with Low ON-resistance and Hight Current Density

4H-Sic Trench Gate Lateral MOSFET with Dual Source Trenches for Improved Performance and Reliability

Recent advances in silicon carbide MOSFET power devices

A Novel Deep-Trench Super-Junction SiC MOSFET with Improved Specific On-Resistance

An improved structure of 3.3kV 4H-SiC VDMOSFETs with lower on-resistance and reverse transfer capacitance

Demonstration of SiC Trench Gate MOSFETs with Narrow Cell Pitch Using Source Self-Aligned Process

SiC Trench MOSFET with Reduced Switching Loss and Increased Short-Circuit Capability

A Robust and Area-Efficient Guard Ring Edge Termination Technique for 4H-Sic Power MOSFETs

Considerations for SiC Super Junction MOSFET: On-resistance, Gate Structure, and Oxide Shield

Improved 4H-Sic UMOSFET with Super-Junction Shield Region