Abstract:Micro-electro-mechanic-system (MEMS) devices on flexible substrate are important for non-planar and non-rigid surface applications. In this paper, a novel and cost-effective fabrication process for an 8×8 MEMS temperature sensor array with a lateral dimension of 2.5mm×5.5mm on a polyimide flexible substrate is developed. A 40μm thick polyimide substrate is formed on a rigid silicon wafer using as a mechanical carrier throughout the fabrication by four successive spin coating liquid polyimide. The arrayed temperature sensing elements made of 1200Å sputtered platinum thin film on polyimide substrate show excellent linearity with a temperature coefficient of resistance of 0.0028/°C. The purposed sensor obtains a high sensitivity of 0.781Ω/°C at 8mA at constant drive current. Because of the low heat capacity and excellent thermal isolation, the temperature sensing element shows excellent high sensitivity and a fast thermal response. The finished devices are flexible enough to be folded and twisted achieving any desired shape and form. Employing spin-coated liquid polyimide substrate instead of solid polyimide sheet minimizes the thermal cycling as well as improves the production yield. This fabrication technique first introduces the spin-coated PDMS (Polydimethylsiloxane) interlayer between the silicon carrier and the polyimide substrate and makes the polyimide-based devices separate much easier and greatly simplifies the fabrication process with a high production yield. A non-successive two-stage cure procedure for the polyimide precursor is developed to meet low-temperature requirement of the PDMS interlayer. The fabrication procedure developed in this research is compatible with conventional MEMS technology through an optimized integration process. The novel flexible MEMS technology can benefit the development of other new flexible polyimide-based devices.

A process for fabricating robust electrothermal micromirrors with customizable thermal response time and power consumption

Ion Write Microthermotics: Programing Thermal Metamaterials at the Microscale

Research of an Adaptive Micro-Mirror Based on Micro-Opto-Electro-Mechanical- System

Machining and functional testing of adaptive micro-mirror array

Study of A Deformable Micro-Mirror Based on Pzt Films

A Large-Scan-Range Electrothermal Micromirror Integrated with Thermal Convection-Based Position Sensors

Fabrication of MEMS components using ultrafine-grained aluminium alloys

A Novel Fabrication Process of MEMS Devices on Polyimide Flexible Substrates

Simulation, Optimization and Measurement of MEMS Torsion Micro Mirrors for Optical MEMS Application

Development of polymer MEMS process technology as an approach to a sustainable production system

State-of-the-Art Materials Used in MEMS Micromirror Arrays for Photonic Applications

A new fabrication method for enhancing the yield of linear micromirror arrays assisted by temporary anchors

Optimization and Fabrication of MEMS suspended structures for nanoscale thermoelectric devices

Study and Manufacture of a Novel Micro-Deformable Mirror

Development of Thermoelectric Microdevices by Combining Materials Processing and Silicon Micromachining Technology

Design and fabrication of MEMS devices using the integration of MUMPs, trench-refilled molding, DRIE and bulk silicon etching processes

Experimental Investigation of a Thermo-Field Bimetal Deformable Mirror with Aluminum Base

Development of MEMS Process Compatible (Bi,Sb)2(Se,Te)3-Based Thin Films for Scalable Fabrication of Planar Micro-Thermoelectric Generators

Big MEMS for Thermal Measurement

Microfabrication of thermoelectric materials by silicon molding process

Advanced plasma processing combined with trench isolation technology for fabrication and fast prototyping of high aspect ratio MEMS in standard silicon wafers