Abstract:This paper presents characterization and compensation of the thermal bias drift of a MEMS accelerometer whose effective stiffness is electrostatically tuned to a low value with the help of the single-sided parallel plates (SSPPs) capacitors. A temperature drift model for the proposed accelerometer is built and the temperature effect on the mechanical stiffness and the circuit gains is characterized. The characterization reveals that the variations of the feedforward coefficient including the mechanical stiffness and the readout gain due to the temperature change play a significant role in the bias drift of output of the proposed closed-loop accelerometer. On the other hand, the variations of both feedback gain and tuning gain as a function of temperature are one-order-of-magnitude less than that of the feedforward coefficient. To calibrate the feedforward coefficient, an excitation signal as a form of AC reference displacement is introduced to drive the proof mass and the readout response is demodulated to calibrate the variance of the feedforward coefficient correspondingly. An open-loop compensation scheme for the temperature-induced bias drift using the variance of the calibrated response is proposed accordingly. Alternatively, the calibrated response can be controlled to a preset value by a new proportion integral derivative (PID) controller by the adjustment of the SSPP tuning voltage. The output of the PID controller is used for the calibration of the introduced bias from the electrostatic tuning force. Therefore, a closed-loop compensation of the thermal bias drift is achieved by remaining the feedforward coefficient while eliminating the calibrated bias. Experiments under a temperature cooling process and different tuning voltages are carried out to verify two proposed compensation schemes. The temperature drift coefficients (TDCs) of both compensated outputs exhibit at least one-order-of-magnitude reduction in response to the temperature change. When the effective stiffness of the accelerometer is tuned to about 4.19 N m(-1), the TDC of the compensated output using the proposed open-loop or closed-loop compensation schemes is reduced to about 0.1136 or 0.0391 mg degrees C-1, respectively and meanwhile, the Allan bias instability is slightly increased to 48.63 or 56.14 mu g, respectively.

A Temperature Compensation Method For Micromachined Thermal Gas Gyroscope

Dead-beat control based thermal compensation for micromachined thermal gas gyroscope

Temperature Drift Compensation of a Tuned Low Stiffness MEMS Accelerometer Based on Double-Sided Parallel Plates

Characterization and Compensation of Thermal Bias Drift of a Stiffness-Tunable MEMS Accelerometer

Temperature Compensation Method for MEMS Accelerometer Based on Resonant Frequency

A Novel Temperature Compensation Method for a MEMS Gyroscope Oriented on a Periphery Circuit

Research on Temperature Compensation Technology of Micro-Electro-Mechanical Systems Gyroscope in Strap-Down Inertial Measurement Unit

A Temperature Characteristic Research and Compensation Design for Micro-Machined Gyroscope

Research on temperature dependent characteristics and compensation methods for digital gyroscope

Research on Low Temperature Drift Suppression of Micro-Machined Gyroscope Based on Self-Calibration Technology

MEMS Gyroscope Temperature Compensation Based on Drive Mode Vibration Characteristic Control

A Temperature Drift Suppression Method of Mode-Matched MEMS Gyroscope Based on a Combination of Mode Reversal and Multiple Regression

Research on Thermal Characteristic and Compensation Algorithm for MEMS-gyroscope

Temperature drift suppression for micro‐electro‐mechanical system gyroscope based on vibrational‐displacement control with harmonic amplitude ratio

Online Self-Compensation For Enhanced The Scale Factor Stability Of A Micromachined Gyroscope

Microgyroscope Temperature Effects and Compensation-Control Methods.

Research on Temperature Compensation for MEMS Gyroscope Bias Drift Based on Fuzzy Logic

Temperature Compensation of Monitoring Circuit for Silicon MEMS Gyroscope

Driving-force compensation to improve the bias thermal stability of MEMS gyroscopes

Bias Thermal Stability Improvement of MEMS Gyroscope with Quadrature Motion Correction and Temperature Self‐sensing Compensation

The On-Chip Temperature Compensation and Temperature Control Research for the Silicon Micro-Gyroscope