Abstract:This paper presents characterization and compensation of the thermal bias drift of a MEMS accelerometer whose effective stiffness is electrostatically tuned to a low value with the help of the single-sided parallel plates (SSPPs) capacitors. A temperature drift model for the proposed accelerometer is built and the temperature effect on the mechanical stiffness and the circuit gains is characterized. The characterization reveals that the variations of the feedforward coefficient including the mechanical stiffness and the readout gain due to the temperature change play a significant role in the bias drift of output of the proposed closed-loop accelerometer. On the other hand, the variations of both feedback gain and tuning gain as a function of temperature are one-order-of-magnitude less than that of the feedforward coefficient. To calibrate the feedforward coefficient, an excitation signal as a form of AC reference displacement is introduced to drive the proof mass and the readout response is demodulated to calibrate the variance of the feedforward coefficient correspondingly. An open-loop compensation scheme for the temperature-induced bias drift using the variance of the calibrated response is proposed accordingly. Alternatively, the calibrated response can be controlled to a preset value by a new proportion integral derivative (PID) controller by the adjustment of the SSPP tuning voltage. The output of the PID controller is used for the calibration of the introduced bias from the electrostatic tuning force. Therefore, a closed-loop compensation of the thermal bias drift is achieved by remaining the feedforward coefficient while eliminating the calibrated bias. Experiments under a temperature cooling process and different tuning voltages are carried out to verify two proposed compensation schemes. The temperature drift coefficients (TDCs) of both compensated outputs exhibit at least one-order-of-magnitude reduction in response to the temperature change. When the effective stiffness of the accelerometer is tuned to about 4.19 N m(-1), the TDC of the compensated output using the proposed open-loop or closed-loop compensation schemes is reduced to about 0.1136 or 0.0391 mg degrees C-1, respectively and meanwhile, the Allan bias instability is slightly increased to 48.63 or 56.14 mu g, respectively.

Driving-force compensation to improve the bias thermal stability of MEMS gyroscopes

Identification and Suppression of Driving Force Misalignment Angle for a MEMS Gyroscope Using Parametric Excitation

A Sub-0.1°/H Bias-Instability MEMS Gyroscope Using Resonant Constant-Frequency Driving Technique

Characterization and Compensation of Thermal Bias Drift of a Stiffness-Tunable MEMS Accelerometer

Performance Improvement for MEMS Gyroscopes by Suppressing the Circuit Phase Delay

A Real-Time Temperature Compensation Algorithm for a Force-Rebalanced MEMS Capacitive Accelerometer Based on Resonant Frequency.

MEMS gyroscopes parametric excitation control scheme with constant resonant frequency

Effects Of Both The Drive- And Sense-Mode Circuit Phase Delay On Mems Gyroscope Performance And Real-Time Suppression Of The Residual Fluctuation Phase Error

Bias Thermal Stability Improvement of MEMS Gyroscope with Quadrature Motion Correction and Temperature Self‐sensing Compensation

A 0.09°/h Bias-Instability MEMS Gyroscope Working with a Fixed Resonance Frequency

Drive Mode Control for MEMS Gyroscopes with Electrostatically Tunable Structure

Temperature Drift Compensation of a Tuned Low Stiffness MEMS Accelerometer Based on Double-Sided Parallel Plates

Temperature-dependence improvement for a MEMS gyroscope using triangular-electrode based capacitive detection method

Temperature Compensation Method for MEMS Accelerometer Based on Resonant Frequency

Research on Thermal Characteristic and Compensation Algorithm for MEMS-gyroscope

Temperature Bias Drift Phase-Based Compensation for a MEMS Accelerometer with Stiffness-Tuning Double-Sided Parallel Plate Capacitors

Design and Test of MEMS Gyroscope Control System Based on LMSD

MEMS Gyroscope Temperature Compensation Based on Drive Mode Vibration Characteristic Control

A Temperature Drift Suppression Method of Mode-Matched MEMS Gyroscope Based on a Combination of Mode Reversal and Multiple Regression

Linear Compensation to Thermal Bias Drift of MEMS Accelerometer Based on Temperature Measurement Circuit

Study on the Influence Induced by Electrical Coupling among Interconnection Lines in MEMS Gyroscopes