Abstract:Since hemispherical resonator (HSR) is core component of hemispherical resonator gyro (HRG), the surface integrity directly determines performance parameters of HSR, which then affects the working accuracy and service life of HRG. Therefore, it is necessary to investigate the effect of surface integrity on quality factor of HSR. This work focuses on the surface integrity evolution of fused silica HSR machined by the multi-energy field coupled magnetorheological polishing (MEMRP) and the influence of surface integrity on quality factor. Firstly, the mechanism of removing subsurface damage and surface morphology evolution of the fused silica component machined by MEMRP were investigated to reveal the surface quality evolution rules. It was found that the removal of subsurface damage in fused silica components can be divided into three zones: rapid improvement zone, slow improvement zone, and gentle improvement zone. The improvement of surface roughness is slow in the gentle improvement zone, and the nonlinear regression model between subsurface damage depth and surface roughness is proposed. Then, the surface structure evolution and the mechanical characteristics of the surface layer of fused silica components during the MEMRP process was systematically analyzed. It was found that the initial polishing stage significantly improved the surface mechanical performance parameters. Finally, the quality factor of HSR with various surface qualities was measured. The results show that the subsurface damage depth and quality factor exhibit nonlinear relationship and the crack surface layer has a significant impact on the quality factor. Completely removing the subsurface damage, quality factor of HSR with diameter of 20 mm increased from hundreds of thousands to 2.01×10 7 , and the uniformity of quality factor is 1.2%. This work could offer theoretical guidance and parameter basis for quickly removing subsurface damage and achieving high-performance manufacturing of fused silica HSR.

Analysis of the Impacts of Mechanical Errors on the RF Performance of a Single Spoke Cavity

Error Analysis and Modeling of Monolithic Micromanipulator

Vibration Analysis and Suppression in Robotic Hole Chamfering Process

Analysis of machining errors' effects on gear pair meshing using contact finite element method

Analysis of the Effects on Ultra-Short Laser Pulse Beam Quality Caused by Errors in Optical Systems

Effects of Geometric and Spindle Errors on the Quality of End Turning Surface

Analysis of the Influence of Blade's Machining Error on Aerodynamic Performance of Impeller Based on NUMECA

Influence of Fabrication Error on the Characteristics of a 2-D Photonic-Crystal Cavity

Uncertainty analysis of quasi-zero stiffness metastructure for vibration isolation performance

Tolerance Modeling and Analysis Considering Form Defects for Spaceborne Array Antenna

Analysis of the Influence of Fabrication Errors on the Far-Field Performance of Si and Si3N4 Antennas

Static and Dynamic Mechanical Behaviors of Electrostatic MEMS Resonator with Surface Processing Error

Design of a 450 MHz Β = 0.2 Single Spoke Cavity at PKU

Error analysis of vertical test for CEPC 650 MHz superconducting radio-frequency cavity

Research On Rf Cavity Tolerance Of Cyciae-100

Research on the Configuration Optimization of All-Metal Micro Resonant Hemisphere

The Effects of Structure Defects on the Performance of A Micro Comb Resonator

Characterization of Microresonator-Geometry-deformation for Cavity Optomechanics.

Effects of Fabrication Errors on MTF and Diffraction Efficiency for Binary Optical Lens

Effect of surface integrity on quality factor of hemispherical resonator

Research on the Influence of the Material Removal Profile of a Spherical Polishing Tool on the Mid-Spatial Frequency Errors of Optical Surfaces