Abstract:Turbomachinery components are inevitably subjected to various sources of manufacturing errors. The resultant variations in blade geometry eventually lead to performance degradation. This is especially true for transonic centrifugal compressor impellers where the complex interaction between the geometric variations and shock waves may amplify such degradation. However, relevant studies on uncertainty quantification or robust design optimization of centrifugal impellers are quite rare. The mechanisms of how the realistic manufacturing errors influence the impeller aerodynamic performance are not clear. In addition, most existing studies have considered a fixed level of manufacturing tolerance applied to the impeller blade surface, which neglects the combined effect of blade geometry and manufacturing tolerance on impeller performance. In this study, a collaborative robust design optimization was performed for a transonic centrifugal impeller considering realistic manufacturing errors. The realistic manufacturing error field was first modeled based on the measurements of 92 centrifugal impellers. With a combination of computational fluid dynamics simulation and the non-intrusive polynomial chaos method, the influence of manufacturing errors on impeller performance and flow field variations was quantified. To save computational costs for the uncertainty quantification, a dual dimensionality reduction method was proposed to reduce the dimensionality of uncertainties. Finally, blade angles and the manufacturing tolerance of the impeller were collaboratively optimized to enhance the impeller performance robustness against manufacturing errors. The results show that the impeller aerodynamic performance exhibited a downward trend in the presence of manufacturing errors. The flow mechanisms responsible for this trend were mainly associated with increased intensity of the shock waves near the inducer blade tip. Such shock waves were significantly alleviated by reducing impeller inlet blade angles without the loss of pressure rise capability. Consequently, the impeller performance robustness against manufacturing errors was enhanced with the standard deviation of polytropic efficiency being reduced by 35% at a lower anticipated manufacturing cost due to increased tolerance allowance.

Analysis of the Influence of Blade's Machining Error on Aerodynamic Performance of Impeller Based on NUMECA

Statistical Investigations of Profile Error Impact on Flow and Performance of a Low-Pressure Turbine Cascade

Optimization Design of Centrifugal Fan Impeller Based on Numerical Simulation.

Impact of Inlet Flow Angle Variation on the Performance of a Transonic Compressor Blade Using NIPC

Numerical Research on Effect of 3-D Blade Surface Profiles on Aerodynamic Performance of Centrifugal Compressor Impellers

Aerodynamic Analysis and Design Optimization of a Centrifugal Compressor Impeller Considering Realistic Manufacturing Uncertainties

Collaborative Robust Design Optimization of Blade Geometry and Manufacturing Tolerance for a Transonic Centrifugal Impeller

Numerical Simulation of Inner Flow Field in Centrifugal Impeller with Long, Middle and Short Blades

Numerical Simulation of Flow in Centrifugal Pump with Complex Impeller

Effect of NC tool-path planning error of impeller on its aerodynamic characteristics

Mechanism Analysis of the Influence of Blade Thickness Deviation on The Performance of Axial Flow Compressor

Influence of Geometrical Modeling on the Results of Numerical Prediction for the Centrifugal Compressor with Shrouded Impeller

Joint sensitivity analysis method of impeller aerodynamic performance to key geometric errors of five-axis machine tool

Mechanism Analysis and Uncertainty Quantification of Blade Thickness Deviation on Rotor Performance

Numerical Study Of Impingement And Film Composite Cooling On Blade Leading Edge

Influence of manufacturing errors on the aerodynamic working stability of axial flow compressors

The Aerodynamic Analysis and Optimization of Centrifugal Impeller Performance Affected by Blade Loading

Performance Oriented Machining Error Analysis and Statistic of Compressor Blade

CFD result validation and analysis of a subsonic centrifugal compressor impeller with splitter blades

Numerical Simulation and Optimization for Air Flow in an Impeller Blower

Impact of Realistic Manufacturing Uncertainties on the Aerodynamic Performance of a Transonic Centrifugal Impeller