Abstract:A digital etching method was proposed to achieve excellent control of etching depth. The digital etching characteristics of p+-Si and Si0.7Ge0.3 using a combination of HNO3 oxidation and buffered oxide etching oxide removal processes were investigated. Experimental results showed that oxidation saturates as time goes on because of low activation energy and its diffusion-limited characteristic. An oxidation model was developed to describe the wet oxidation process with nitric acid. The model was calibrated with experimental data, and the oxidation saturation time, final oxide thickness, and selectivity between Si0.7Ge0.3 and p+-Si were obtained. In Si0.7Ge0.3/p+-Si stacks, the saturated relative etched depth per cycle was 0.5 nm (four monolayers), and variation between experiments was about 4% after saturation. A corrected selectivity calculation formula was also proposed, and the calculated selectivity was 3.7–7.7 for different oxidation times, which was the same as the selectivity obtained from our oxidation model. The proposed model can be used to analyze process variations and repeatability, and it can provide credible guidance for the design of other wet digital etching experiments.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c14018?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c14018</a>.SEM cross-sectional image and analysis of etched Si/SiGe stacks using the HNO3/HF/CH3COOH mixture; experimental details of HNO3–BOE digital etching; and variation analyses of REPC from the model with different parameter variables (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c14018/suppl_file/am0c14018_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

A Practical Galvanic Etch-Stop in KOH Using Sodium Hypochlorite

Galvanic etch stop for Si in KOH

Electrochemistry Of Hypochlorite At Silicon In Alkaline Etchants - Applications In Device Fabrication

Controlling Etching of Germanium through Surface Charge Manipulation

The influence of oxidizing agents on etching and passivation of silicon in KOH solution

A new theory for the anisotropic etching of silicon and some underdeveloped chemical micromachining concepts

A spin-on photosensitive polymeric etch protection mask for anisotropic wet etching of silicon

Effect of Isopropanol on Gold Assisted Chemical Etching of Silicon Microstructures

Evaluations of KOH Solution As an Effective Developer for Chemical Amplified Resist UVIII

Diamond Membrane Production: The Critical Role of Radicals in the Non-Contact Electrochemical Etching of sp2 Carbon

Selective etching of PDMS: etching as positive resist

Galvanic Cell Formation: A Review of Approaches to Silicon Etching for Sensor Fabrication

Etching of high aspect ratio features in Si using SF6∕O2∕HBr and SF6∕O2∕Cl2 plasma

Simulation of anisotropic chemical etching of crystalline silicon using a cellular automata model

Molybdenum etching using an SF6, BCl3 and Ar based recipe for high aspect ratio MEMS device fabrication

Effective Approaches to Improve Au Etching Process Performance in MEMS Devices

Polymeric mask protection for alternative KOH silicon wet etching

Etch stop of silicon surface induced by tribo-nanolithography

Maskless Etching Of Three-Dimensional Silicon Structures In Koh

Operando Studies of Iodine Species in an Advanced Oxidative Water Treatment Reactor

Selective Digital Etching of Silicon–Germanium Using Nitric and Hydrofluoric Acids