Abstract:The development of sensitive fiber-optic accelerometers is a subject of continuing interest. To acquire high resolution, Michelson phase interferometric techniques are widely adopted. Among the variety structures, the compliant cylinder approach is particularly attractive due to its high sensitivity that is defined as the induced phase shift per applied acceleration. While the two arms of Michelson interferometer should be at the same optical path, it is inconvenient to adjust the two arms' length to equal, also the polarization instability and phase random drift will cause a signal decline. To overcome these limitations, a novel optical fiber accelerometer based on differential interferometric techniques is proposed and investigated. The interferometer is a Sagnac-like white light interferometer, which means the bandwidth of laser spectrum can be as wide as tens nanometers. This interferometer was firstly reported by Levin in 1990s. Lights are divided to two paths before entering the coupler. To induce time difference, one passes through a delay arm and another goes a direct arm. After modulated by the sensing component, they reflect to opposite arm. The sensing part is formed by a seismic mass that is held to only one compliant cylinder, where the single-mode optical fiber is wrapped tightly. When sticking to vibrations, the cylinder compresses or stretches as a spring. The corresponding changes in cylinder circumference lead to strain in the sensing fibers, which is detected as an optical phase shift by the interferometer. The lights from two arms reach the vibration source at different time, sensing a different accelerate speed; produce a different optic path difference. Integrating the dissimilarity of the accelerated speed by time can obtain the total acceleration graph. A shaker's vibration has been tested by the proposed accelerometer referring to a standard piezoelectric accelerometer. A 99.8% linearity of the optical phase shift to the ground acceleration is achieved. The acceleration sensitivity is 300 rad/g. It proves to have a simple structure, good practice, reliable measurement and stable performance.

High-Sensitivity Fiber-Optic Accelerometer Based On Multilayer Fiber Coils

Coiling an Optical Fiber for Long-Range Dynamic Displacement and Force Sensing

Monolithic Integrated Cavity Optomechanical Accelerometer Based on Push-Pull Photonic Crystal Zipper Cavity

Research On Accelerometer Based On Multi-Mode Interference

Miniature Tri-Axis Accelerometer Based on Fiber Optic Fabry-Pérot Interferometer.

Theoretical Model and Design of Highly Sensitive Reflective Fiber Optic Fabry-Pérot Cavity Accelerometer Independent of Fiber Stiffness

Compact Fiber Optic Accelerometer

Sensitivity enhancement of interferometric fiber-optic accelerometers using multi-core fiber

Fiber Optic Accelerometer Based On Long Period Fiber Grating Induced By Co2 Laser Pulses

A Novel Differential Optical Fiber Accelerometer

Fiber Optic Accelerometer Based on Fiber-Mirror Interference Cavity

Ultra-high-resolution phase demodulation based miniature fiber-optic accelerometer at low and medium frequencies

Accelerometer Based on Long Period Fiber Grating Induced by CO_2 Laser

A New Fiber Optic Accelerometer Based on Fiber Bragg Grating

High-Sensitivity Microfiber Strain and Force Sensors

A Fiber-Optic Fabry-Perot Accelerometer Based on High-Speed White Light Interferometry Demodulation

Sensitivity Enhancement Method for Dual-Polarization Interferometric Fiber-Optic Angular Accelerometer

A High-Resolution Fiber Optic Accelerometer Based on Intracavity Phase-Generated Carrier (PGC) Modulation

Analysis of the natural frequency and phase sensitivity of an optical fiber accelerometer coated with a rigid package

High-sensitivity fiber optic graphene resonant accelerometer

Highly sensitive multicore fiber accelerometer for low frequency vibration sensing