Abstract:The ultrahigh static displacement-acceleration sensitivity of a mechanical sensing chip is essential primarily for an ultra-sensitive accelerometer. In this paper, an optimal design to implement to a single-axis MOEMS accelerometer consisting of a grating interferometry cavity and a micromachined sensing chip is presented. The micromachined sensing chip is composed of a proof mass along with its mechanical cantilever suspension and substrate. The dimensional parameters of the sensing chip, including the length, width, thickness and position of the cantilevers are evaluated and optimized both analytically and by finite-element-method (FEM) simulation to yield an unprecedented acceleration-displacement sensitivity. Compared with one of the most sensitive single-axis MOEMS accelerometers reported in the literature, the optimal mechanical design can yield a profound sensitivity improvement with an equal footprint area, specifically, 200% improvement in displacement-acceleration sensitivity with moderate resonant frequency and dynamic range. The modified design was microfabricated, packaged with the grating interferometry cavity and tested. The experimental results demonstrate that the MOEMS accelerometer with modified design can achieve the acceleration-displacement sensitivity of about 150 mu m/g and acceleration sensitivity of greater than 1500V/g, which validates the effectiveness of the optimal design.

Theoretical Model and Design of Highly Sensitive Reflective Fiber Optic Fabry-Pérot Cavity Accelerometer Independent of Fiber Stiffness

Monolithic Integrated Cavity Optomechanical Accelerometer Based on Push-Pull Photonic Crystal Zipper Cavity

Mechanical Design Optimization of A Single-Axis Moems Accelerometer Based on A Grating Interferometry Cavity for Ultrahigh Sensitivity

Optical Design and Analysis of a High Resolution MOEMS Accelerometer Based on Diffraction Grating

A High-Frequency Acceleration Sensor Based on Fiber Grating

An FBG-FPI Accelerometer Based on Femtosecond Laser-Written Ultrashort Fiber Bragg Gratings

Ultra-high-resolution phase demodulation based miniature fiber-optic accelerometer at low and medium frequencies

Broadband Flat Response High Sensitivity FBG Accelerometer Based on Multiresonance Structure

Fiber Optic Accelerometer Based on Fiber-Mirror Interference Cavity

A High-Resolution Fiber Optic Accelerometer Based on Intracavity Phase-Generated Carrier (PGC) Modulation

A Medium-Frequency Fiber Bragg Grating Accelerometer Based on Flexible Hinges

Dual straight-wing FBG accelerometer for low-frequency vibration measurement

Fiber Bragg Grating Accelerometer Based on Asymmetric Shaped Flexible Hinge Structure

Rotating cantilever-based low-frequency double-fiber grating acceleration sensor

Miniaturized fiber Bragg grating accelerator sensors for low-frequency vibration monitoring

Research on a Dual Polarization-Maintaining FBG Accelerometer

Design and test of a FBG acceleration sensor based on multi-stage flexible hinges

A Novel Fiber Bragg Grating Accelerometer

A fiber Bragg grating acceleration sensor based on a circular flexure hinge structure for medium- and high-frequency vibration measurements

Optimal design of high sensitive integrated optical accelerometer

Design and analysis of high-frequency fiber Bragg grating vibration sensor