Abstract:We have designed a hot-plate-type micro-Pirani vacuum gauge with a simple structure and compatibility with conventional semiconductor fabrication processes. In the Pirani gauge, we used a vanadium oxide (VOx) membrane as the thermosensitive component, taking advantage of the high temperature coefficient of resistance (TCR) of VOx. The TCR value of VOx is −2%K−1∼−3%K−1, an order of magnitude higher than those of other thermal-sensitive materials, such as platinum and titanium (0.3%K−1∼0.4%K−1). On one hand, we used the high TCR of VOx to increase the Pirani sensitivity. On the other hand, we optimized the floating structure to decrease the thermal conductivity so that the detecting range of the Pirani gauge was extended on the low-pressure end. We carried out simulation experiments on the thermal zone of the Pirani gauge, the width of the cantilever beam, the material and thickness of the supporting layer, the thickness of the thermal layer (VOx), the depth of the cavity, and the shape and size. Finally, we decided on the basic size of the Pirani gauge. The prepared Pirani gauge has a thermal sensitive area of 130 × 130 μm2, with a cantilever width of 13 μm, cavity depth of 5 μm, supporting layer thickness of 300 nm, and VOx layer thickness of 110 nm. It has a dynamic range of 10−1~104 Pa and a sensitivity of 1.23 V/lgPa. The VOx Pirani was designed using a structure and fabrication process compatible with a VOx-based uncooled infrared microbolometer so that it can be integrated by wafer level. This work contains only our MEMS Pirani gauge device design, preparation process design, and readout circuit design, while the characterization and relevant experimental results will be reported in the future.

Performace Improvement Of Cmos-Mems Pirani Vacuum Gauge With Hollow Heater Design

A CMOS MEMS Pirani vacuum gauge with complementary bump heat sink and cavity heater

Surface Micromachined CMOS-MEMS Pirani Vacuum Gauge With Stacked Temperature Sensor

A Composite-Type MEMS Pirani Gauge for Wide Range and High Accuracy

Research on Micromachined Pirani Gauge

Design of a High Sensitivity Pirani Gauge Based on Vanadium Oxide Film for High Vacuum Measurement

Overview of the MEMS Pirani Sensors

A MEMS Thermopile Pirani Sensor Integrated With Composite Nanoforests for Vacuum Monitoring in Semiconductor Equipment

Electrostatically actuated all metal MEMS Pirani gauge with tunable dynamic range

A micro in-situ Pirani vacuum gauge for microsystem package applications

Monolithic Integrated Cmos-Mems Mos Type Gas Sensor And Novel Heater For Sensitivity And Power Consumption Enhancement

Non-Silicon MEMS Calorimetric Gas Flow Sensor

A Novel Micro Pirani Gauge with Mono-wire Sensing Unit for Microsystem Application

A Simple Micro Pirani Vasuum Gauge Fabricated by Bulk Micromachining Technology

Design, Simulation, and Performance Evaluation of a High Temperature and Low Power Consumption Microheater Structure for MOS Gas Sensors

A Novel Low Pressure Sensor with Fin-Structures

A Performance-Enhanced Liquid Metal-Based Microheater with Parallel Ventilating Side-Channels

High Performance Bidirectional Thermal Gas Flow Sensor of (100) Silicon Single-Sided Fabrication by 45-Tilted Dicing

Performance Enhance of CMOS-MEMS Thermoelectric Infrared Sensor by Using Sensing Material and Structure Design

A Mono-Metal-Wire Pressure Measuring Technology for Low Pressure Package of MEMS Devices

Design and Fabrication of MOS Type Gas Sensor with Vertically Integrated Heater Using CMOS-MEMS Technology