Abstract:We have designed a hot-plate-type micro-Pirani vacuum gauge with a simple structure and compatibility with conventional semiconductor fabrication processes. In the Pirani gauge, we used a vanadium oxide (VOx) membrane as the thermosensitive component, taking advantage of the high temperature coefficient of resistance (TCR) of VOx. The TCR value of VOx is −2%K−1∼−3%K−1, an order of magnitude higher than those of other thermal-sensitive materials, such as platinum and titanium (0.3%K−1∼0.4%K−1). On one hand, we used the high TCR of VOx to increase the Pirani sensitivity. On the other hand, we optimized the floating structure to decrease the thermal conductivity so that the detecting range of the Pirani gauge was extended on the low-pressure end. We carried out simulation experiments on the thermal zone of the Pirani gauge, the width of the cantilever beam, the material and thickness of the supporting layer, the thickness of the thermal layer (VOx), the depth of the cavity, and the shape and size. Finally, we decided on the basic size of the Pirani gauge. The prepared Pirani gauge has a thermal sensitive area of 130 × 130 μm2, with a cantilever width of 13 μm, cavity depth of 5 μm, supporting layer thickness of 300 nm, and VOx layer thickness of 110 nm. It has a dynamic range of 10−1~104 Pa and a sensitivity of 1.23 V/lgPa. The VOx Pirani was designed using a structure and fabrication process compatible with a VOx-based uncooled infrared microbolometer so that it can be integrated by wafer level. This work contains only our MEMS Pirani gauge device design, preparation process design, and readout circuit design, while the characterization and relevant experimental results will be reported in the future.

A CMOS MEMS Pirani vacuum gauge with complementary bump heat sink and cavity heater

Performace Improvement Of Cmos-Mems Pirani Vacuum Gauge With Hollow Heater Design

Surface Micromachined CMOS-MEMS Pirani Vacuum Gauge With Stacked Temperature Sensor

A Composite-Type MEMS Pirani Gauge for Wide Range and High Accuracy

Design of a High Sensitivity Pirani Gauge Based on Vanadium Oxide Film for High Vacuum Measurement

An Untrimmed BJT-Based Temperature Sensor with Dynamic Current-Gain Compensation in 55-Nm CMOS Process

A CMOS Temperature Sensor with Versatile Readout Scheme and High Accuracy for Multi-Sensor Systems

A 1-V Diode-Based Temperature Sensor with a Resolution FoM of 3.1pj•k2 in 55nm CMOS

Research on Micromachined Pirani Gauge

Electrostatically actuated all metal MEMS Pirani gauge with tunable dynamic range

A MEMS Thermopile Pirani Sensor Integrated With Composite Nanoforests for Vacuum Monitoring in Semiconductor Equipment

A micro in-situ Pirani vacuum gauge for microsystem package applications

A Simple Micro Pirani Vasuum Gauge Fabricated by Bulk Micromachining Technology

A Novel Micro Pirani Gauge with Mono-wire Sensing Unit for Microsystem Application

A MEMS-Type Hot-cathode Ionization Gauge With Carbon Nanotube-based Electron Emitters

A Novel Low Pressure Sensor with Fin-Structures

A single crystal silicon micro-Pirani vacuum gauge with high aspect ratio structure

Monolithic Integrated Cmos-Mems Mos Type Gas Sensor And Novel Heater For Sensitivity And Power Consumption Enhancement

Stress engineered SU-8 dielectric-microbridge based polymer MEMS Pirani gauge for broad range hermetic characterization

Non-Silicon MEMS Calorimetric Gas Flow Sensor

A MEMS Friction Gauge For High Vacuum Measurement