Abstract:Suspensions of mixed YSZ (3 mol%) and Ni particles in acetylacetone medium were prepared using iodine as a dispersant. The effect of iodine concentration on suspension stability, particle size distribution and zeta potential of suspensions were studied to optimize the suspension chemistry. Electrophoretic deposition (EPD) method was applied for the preparation of green form YSZ/Ni nano-composite coating with suspension of YSZ and Ni particles in acetylacetone in presence of 0.2 g/l iodine. Based on the derived results, both applied voltage of 7 V and deposition time of 4 min are suitable for deposition of green composite coating. After deposition, green form coatings were heat treated at 500 °C for 1 h for oxidation of nickel particles and further sintered at 1100 °C for 4 h in the air. For the first time, the reaction bonding process along with the sintering heat treatment were studied and developed to fabricate uniform, crack-free and dense YSZ/NiO coatings. The volume shrinkage of the coating was compensated by the volume expansion, caused by oxidation of nickel in the green coatings. Also, addition of Ni particles to YSZ lowered the sintering temperature of the coating about 300 °C, since sintering temperature of the pure YSZ is 1400 °C but after addition of nickel the coating was sintered at 1100 °C. The coating adhesion to substrate was evaluated using ASTM D3359 and Rockwell C indentation (VDI 3398) methods. The result of adhesion tests showed that the coatings have good adhesion strength (5B according to ASTM D3359B).

Fabrication of Zirconia Coatings Using Electrophoretic Deposition and Reactive Sintering

Fabrication and Characterization of Y2O3 Stabilized ZrO2 Films Deposited with Aerosol-Assisted MOCVD

Deposition of Y2O3 stabilized ZrO2 thin films from Zr(DPM)4 and Y(DPM)3 by aerosol-assisted MOCVD

Cubic Yttria Stabilized Zirconia Sintering Additive Impacts: A Comparative Study

Synthesis of YSZ film by solid single source PE-MOCVD method and characterization

A Direct Laser Sintering Approach for the Electrophoretic Deposition Overlay of Yttria-Stabilized Zirconia on the Surface of a Thermal Barrier Coating System

Preparation of Yttria stabilized Zirconia (YSZ) film by electrophoretic deposition (EPD) method

Reactive deposition of CYSZ coatings using PS-PVD technology

Suspension chemistry and electrophoretic deposition of YSZ-NiO nano-composite films on an iron-nickel based superalloy

In Situ Coagulation of Yttria‐stabilized Zirconia Ceramic with Enhancement of Green Body Via Polyvinyl Pyrrolidone Crosslink

Preparation and Characterization of YSZ Abradable Sealing Coating Through Mixed Solution Precursor Plasma Spraying

Preparation and Performance for Zirconia/Alumina Composite Ceramics

Phase, microstructure and property evolutions of reactively synthesized YSZ-ZrC composite coating based on the content regulation of the precursor

Preparation and Flame Ablation Resistance of Al/Zn/Cu-Incorporated Yttria Partially Stabilized Zirconia Coating

Simple Preparation of Yttria‐Stabilized Zirconia Powders by Plasma Discharge Electrolysis in Nitrate Solution

In-situ Coagulation of Yttria-Stabilized Zirconia Suspension Via Dispersant Hydrolysis Using Sodium Tripolyphosphate

Microstructures of Yttria-Stabilized Zirconia Coatings by Plasma Spray-Physical Vapor Deposition

The Propertied Of Ysz Electrolyte Sintering At 1300 Degrees Enc

Fabrication and Characterization of La0.6Sr0.4Co0.2Fe0.8O3-δ-Yttria Stabilized Zirconia Composites Cathode Prepared by Infiltration Method

Deposition Characteristics, Sintering and Cmas Corrosion Resistance, and Mechanical Properties of Thermal Barrier Coatings by Atmospheric Plasma Spraying

Fabrication of YSZ/Ni Composites by Gelcasting