Abstract:Diamond-like carbon films were prepared by pulsed laser ablation of graphite target in argon plasma produced from electron cyclotron resonance (ECR) microwave discharge and analyzed by Raman spectroscopy and Fourier transform infrared (FTIR) spectroscopy. The analysis shows that the films prepared with argon plasma assistance have different chemical structure compared with the films prepared in vacuum without plasma assistance. The structure of the films prepared with plasma assistance depends strongly on the bias voltages applied on the substrate. Surface morphology observation shows that the films prepared with argon plasma assistance have a smoother surface than the films prepared without plasma assistance. The re-sputtering of the growing film due to the bombardment of the plasma stream results in reduction of the deposition rate. The ablation plumes during film preparation with and without plasma assistance were examined through optical emission spectroscopy. In vacuum, emission lines from mono-atomic carbons and carbon ions dominate the plume emission. In argon plasma, the plume emission exhibits different behavior in its temporal and spatial evolution. It is initially dominated by strong lines from mono-atomic carbons and carbon ions and then evolves to consist mainly of emissions from C2 molecules superposed on a featureless continuum. It is also found that the emission intensity of the C2 molecules as well as the continuum varies with the bias voltages.

Laser-assisted Chemical Vapor Deposition of Diamond Films

Preparation of Anti-Reflective and Protective Diamond-Like Carbon Film on Si Substrate by Femto-Second Pulsed Laser Deposition

Research on Excimer Laser Induced Chemical Vapor Deposition of Diamond Films

Deposition of nano-diamond-like carbon films by an atmospheric pressure plasma gun and diagnostic by optical emission spectrum on the process

Low-Temperature Growth Of Ultra-Thin Nano-Crystalline Diamond Films By Hfcvd In A Ch4/H-2 Mixture

Diamond-Like Carbon Thin-Film Deposition Using A Magnetically Confined Rf Pecvd System

Synthesis of Nano-Crystalline Diamond Films

Highly Transparent Nanocrystalline Diamond Films On Quartz Substrates

Nano-crystalline Diamond Films Synthesized at Low Temperature and Low Pressure by Hot Filament Chemical Vapor Deposition

Growth of well-adhered and smooth diamond thin films on fused silica substrates

Synthesis Of Nano-Crystalline Diamond Film In Hot Filament Chemical Vapour Deposition By Adding Ar

Diamond-like Carbon Thin Films Prepared by ECR Argon Plasma Assisted Pulsed Laser Deposition

Crystalline Diamond Growth in Thin Films Deposited from a CH4/Ar Rf Plasma

Electrodeposition Of Diamond-Like Amorphous Carbon Films On Si From N,N-Dimethylformamide

High quality nanocrystalline diamond films grown by RF-HFCVD

Electron-Beam Defined Delamination and Ablation of Carbon-Diamond Thin-Films on Silicon

Characterization of diamond thin films deposited by a CO2 laser-assisted combustion-flame method

Growth of Diamond Thin Films with Smooth Surface and High Transmittance on Quartz Glass Substrates

Pulsed-laser deposition of diamond-like carbon: Relations between laser fluence, velocity of carbon ions, and bonding in the films

Morphologies and structures of chemical vapor deposited diamond films and film-substrate interfaces

A review on diamond-like carbon films grown by pulsed laser deposition