Abstract:Dual fluidized bed (DFB) reactor systems are widely used in gas–solid two-phase flow applications, whose gas–solid flow characteristics have a significant effect on the performance of many kinds of technologies. A numerical simulation model was established on the basis of a large-scale DFB reactor with a maximum height of 21.6 m, and numerical simulations focused on gas–solid flow characteristics were carried out. The effects of the superficial gas velocity of both beds and the static bed height and particle size on the distribution of the pressure and solid suspension density and the solid circulation rate were studied. The simulation results were in good agreement with the experimental data. With the strong support of the experimental data, the gas–solid flow characteristics of large-scale DFB reactors were innovatively evaluated in this numerical simulation study, which effectively makes up for the shortcomings of the current research. The results showed that the superficial gas velocity of both beds and the static bed height have different degrees of influence on the gas–solid flow characteristics. Specifically, for 282 μm particles, when the superficial gas velocity of both beds and the static bed height were 4.5 m/s, 2.5 m/s, and 0.65 m, respectively, under typical working conditions, the bottom pressure of the two furnaces was 3412.42 Pa and 2812.86 Pa, respectively, and the solid suspension density was 409.44 kg/m3 and 427.89 kg/m3, respectively. Based on the simulation results, the empirical formulas of the solid circulation rate were fitted according to different particle sizes. Under similar conditions, the solid circulation rates of particles with a particle size of 100 μm, 282 μm, 641 μm, and 1000 μm were 2.84–13.28, 0.73–4.91, 0.024–0.216, and 0.0026–0.0095 kg/(m2s), respectively. It can be found that the influence of the particle size on the solid circulation rate is the most significant among all parameters.

Numerical Simulation of Regeneration Process of Oxygen Carriers in Fluidized Bed

Simulation and Analysis of the Regeneration Process of Methanol to Propylene

Kinetic and Regenerator Modeling of the Coke Combustion in the Moving Bed MTP Process

CFD simulation of cross flow in multi-tubular fixed-bed reactor of industrial level

Modeling Agglomeration Behavior in High Temperature Gas–Solid Fluidized Beds Via Monte Carlo Method

Multi-Scale Simulation of Biomass Gasification in Fluidized Beds

Numerical Simulation and Multi-Process Coupling Analysis for Biomass Pyrolysis Fluidized Bed Reactor Based on Synergistic Effects Between Biomass and Nitrogen Inlet Modes

Numerical Investigation of Biomass Pyrolysis Performance in a Fluidized-Bed Reactor by a TFM-DEM Hybrid Model

Numerical Simulation of Temperature and Velocity Field in All-Oxygen Combustion

Multi-channel Simulation of the Regeneration of Diesel Particulate Filters

Numerical Simulation Study on the Gas–Solid Flow Characteristics of a Large-Scale Dual Fluidized Bed Reactor: Verification and Extension

Numerical Simulation of Biomass Gasification in a Bubble Fluidized Bed

Influence of Incoming Flow Conditions on DPF Thermal Regeneration

Numerical investigation of the oxy-fuel combustion in the fluidized bed using macroscopic model supported by CFD-DDPM

Multi-scale Numerical Simulation of Fluidized Beds:Model Applicability Assessment

Numerical simulation of gasification characteristics in a circulating fluidized bed biomass gasifiers

Simulation of Gas-Solid Flow Characteristics of the Circulating Fluidized Bed Boiler under Pure Oxygen Combustion Conditions

Effect of the Conversion Degree on the Apparent Kinetics of Iron-Based Oxygen Carriers

Optimizing injection modes and reactor shapes in gas-particle fluidized beds using a mesoscale CFD model

Optimization and Simulation Analysis of Furnace Structure for Regenerative Thermal Oxidizer

Numerical Simulation of Cross Flow in Fixed Bed Reactor