Abstract:Titanium dioxide is the most common titanium-containing product on the world market, with increasing demand. The global consumption of TiO 2 is 7–7.5 million tons annually. Titanium dioxide is mainly obtained from ilmenite and rutile concentrates. China, USA, Germany, UK, Mexico, and Saudi Arabia are the largest TiO 2 producers. Alongside with the natural sources of titanium, there are man-made sources. These sources include titanium-containing slag obtained as a result of pyrometallurgical processing of ores and concentrates containing titanium dioxide. These slags, in addition to titanium dioxide, contain silicon in the form of dioxide, silicates or aluminosilicates, whose chemical processing is difficult due to a high melting point thereof (higher than 2000°C) and to their chemical stability in mineral acids (sulfuric, nitric, hydrochloric ones). Processing of such raw materials is carried out by classical chlorine-based and sulfuric-acid-based methods. The fluorides in industry are used in the production of aluminum, zirconium, uranium, beryllium, niobium, etc., which indicates the possibility of using fluoride methods for titanium slag processing. The paper is devoted to the consideration of a method for producing titanium dioxide based on the use of ammonium hydrodifluoride NH 4 HF 2 that exhibits a high reactivity with respect to a number of chemically resistant oxides (the oxides of silicon, titanium, aluminum, etc.). The fluoroammonium method for processing titanium slag using NH 4 HF 2 involves slag decomposition in NH 4 HF 2 melt followed by the sublimation of silicon admixture. The purification from iron, aluminum and other impurities is performed using a solution of NH 4 HF 2 . The further precipitation of titanium followed by the precipitate treatment with the use of AlCl 3 and ZnCl 2 solutions with the subsequent calcination makes it possible to obtain a rutile modification of titanium dioxide.

Preparation of High-Grade Titania Slag from Ilmenite-Bearing High Ca and Mg by Vacuum Smelting Method

High-Titanium Slag Preparation Process by Carbothermic Reduction of Ilmenite and Wet-Magnetic Separation

Preparation of high-purity TiSi2 and eutectic Si–Ti alloy by separation of Si–Ti alloy for clean utilization of Ti-bearing blast furnace slag

Electrosynthesis of Titanium from High-Titanium Slag with Short-Process in Molten CaCl2

Preparation of rutile titanium dioxide pigment from low-grade titanium slag pretreated by the NaOH molten salt method

Study on the High-temperature Properties of High-titania Slags produced with Cr-bearing Vanadia-titania Magnetite Smelting in Blast Furnace

A novel process for preparation of titanium dioxide from Ti-bearing electric furnace slag: NH4HF2-HF leaching and hydrolyzing process

Preparation of Titanium by Electro-deoxidation of CaTiO3 in a Molten CaCl2-NaCl Salt

Fluoroammonium Method for Titanium Slag Processing

Recent Progress in Electric Furnace Titanium Slag Processing and Utilization: A Review

Selective enrichment and extraction of well-catalyzed perovskites on melting-microwave heating process from blast furnace slag

Mechanism of Melt Separation in Preparation of Low-Oxygen High Titanium Ferroalloy Prepared by Multistage and Deep Reduction

A process for producing synthetic rutile from Panzhihua titanium slag

A novel preparation of titanium dioxide from titanium slag

Removal of magnesium and calcium from electric furnace titanium slag by H3PO4 oxidation roasting–leaching process

Separation and comprehensive utilization of valuable elements in Ti-bearing electric arc furnace molten slag

Enrichment and reconfiguration of titanium-bearing phase in vortex smelting reduction process of vanadium–titanium magnetite

Extraction of vanadium and enrichment of titanium from modified Ti-bearing blast furnace slag

Evaluation of Titania-Rich Slag Produced from Titaniferous Magnetite Under Fluxless Smelting Conditions

Precipitation Behaviour of Ti Enriched Phase in Ti Bearing Slag