Abstract:In this paper, the beta-tricalcium phosphate (beta-TCP)/ZrO2 composite films were prepared at different laser fluences using pulsed laser deposition technology, and the effects of different ablation fluences on the morphology, structure, mechanical properties and in vitro biocompatibility of the films were investigated. The morphology and structure were analyzed by scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FTIR), the nanohardness and Young's modulus of the films were measured by nanoindentation technique, and the bioactivity of the composite films was studied with simulated body fluid (SBF). The results showed that the increase of ablation fluence increased the number of irregular particles and droplets on the surface of the film, and the intensity of diffraction peaks indicated that the crystallinity level was also improved. The film deposited at 1.02 J/cm2 exhibited nanohardness and Young's modulus of 5.69 +/- 0.28 GPa and 176.33 +/- 2.73 GPa higher than the low-fluence film. The high-fluence film rapidly dissolved and reprecipitated in SBF, and the group band of the new phase of re-precipitation was stronger than that of films deposited at 0.57 J/cm2 and 0.79 J/cm2. The research results indicate that the beta-TCP/ZrO2 composite film with high crystallinity, good mechanical properties and biocompatibility can be obtained by properly increasing the laser fluence.

Investigation of Deposition Rate, Liquid Droplets and Surface Morphology of Zirconium Films Deposited by Pulsed Laser Ablation

Characterization of Zirconium Thin Films Deposited by Pulsed Laser Deposition

Ultrashort Pulse Laser Processing of ZrO2 Ceramics

Investigation of Wettability of Zirconia by Nanosecond Laser Treatment

Interaction between laser beam and target in pulsed laser deposition: laser fluence and ambient gas effects

Roughness and Light Scattering Properties of ZrO 2 Thin Films Deposited by Electron Beam Evaporation

Investigation of the Size of Nanoparticles Formed During Femto- and Nanosecond Laser Ablation of Zircon

Infrared And Raman Spectroscopic Studies Of Optically Transparent Zirconia (Zro2) Films Deposited By Plasma-Assisted Reactive Pulsed Laser Deposition

Effects of Focus Lens Position on Pulsed Laser Deposition of Zno Films

The effects of deuteration on the nanostructured zirconium films deposited by pulsed laser deposition for nuclear fusion applications

Deposition and growth kinetics studies of thin zirconium dioxide films by UVILS-CVD

Effects of Oxygen Pressures on Pulsed Laser Deposition of ZnO Films

Femtosecond laser ablation of Zn in air and ethanol: effect of fluence on the surface morphology, ablated area, ablation rate and hardness

Investigation of microstructures of laser surface-treated Zr702 sheet using electron channeling contrast imaging and electron backscatter diffraction techniques

Wettability Modification of Zirconia by Laser Surface Texturing and Silanization

Characteristics of Β-Tricalcium Phosphate/zro2 Composite Films Deposited by Pulsed Laser Deposition at Different Laser Fluences

Effect of Temperature on Pulsed Laser Deposition of Zno Films

Experimental research of laser-induced damage of the monolayer ZrO2 PVD and sol–gel films

Composition characterization of Pb(Zr,Ti)O3 (PZT) thin films prepared by pulsed laser deposition: Ambient gas and substrate position effect

XRD study on the effect of the deposition condition on pulsed laser deposition of ZnO films

Thickness-dependent structural and optical properties of sputter deposited ZrO2 films