Abstract:We report the in-situ assembly of carbon nanotubes by chemical vapor deposition of hydrocarbon precursor (a solution of ferrocene dissolved in isopropyl alcohol). We utilized the vapor stream inside the reaction chamber to comb carbon nanotubes along the same direction and obtained two-dimensional (planar) assembly of nanotubes with tunable distributions. When the carbon source was flowing at a relatively higher rate of approximately 0.2 ml/min, most of nanotubes were driven along the vapor flow direction during their growth process and formed a thin freestanding mat featured with a parallel arrangement, whereas a lower flowing rate (approximately 0.05 ml/min) only resulted in random spider-web structures consisting of crossed nanotube junctions with a variety of configurations (e.g., "+", "Y", "T" shapes and twists). The measured direction-dependent electrical resistance of these two assemblies was in agreement with respective structures, which was anisotropic for parallel nanotubes and nearly isotropic for random networks. Such large-area planar carbon nanotube arrays with controlled orientation and various junction configurations will facilitate the design and fabrication of electronic and mechanical devices.

Assembly of Mm-Scale Macrobridges with Carbon Nanotube Bundles

Large‐Scale Synthesis of Rings of Bundled Single‐Walled Carbon Nanotubes by Floating Chemical Vapor Deposition

Fabrication of Multiwalled Carbon Nanotube Bridges by Poly-Methylmethacrylate Suspended Dispersion

Uniform Patterned Synthesis of Vertically-Aligned Carbon Nanotubes on Low-Stress Micromechanical Structures

The Fabrication of Vertically Aligned and Periodically Distributed Carbon Nanotube Bundles and Periodically Porous Carbon Nanotube Films Through a Combination of Laser Interference Ablation and Metal-Catalyzed Chemical Vapor Deposition.

Integrating Vertically Aligned Carbon Nanotubes on Micromechanical Structures

Self-aligned Split Gate Electrodes Fabricated on Suspended Carbon Nanotubes

Self-aligned Electrodes for Suspended Carbon Nanotube Structures

Suspended Multiwalled Carbon Nanotubes As Self-Aligned Evaporation Masks.

Constructing Metal Arch Nanobridges Utilizing a Photothermal‐Induced Nanobonding Technique

A Single‐Step Process to Produce Carbon Nanotube‐Zinc Compound Hybrid Materials

Self-Aligned Growth of Single-Walled Carbon Nanotube Bridging Two Electrodes

Production Of Large Area Carbon Nanotube Bundles On Metal Substrate

Multicomponent and Multidimensional Carbon Nanotube Micropatterns by Dry Contact Transfer.

Flow-Induced Planar Assembly of Parallel Carbon Nanotubes and Crossed Nanotube Junctions

Formation of Single Carbon Chain Bridging Two SWCNTs Via Tensile Deformation of Nanobud Junction

Multisegmented One-Dimensional Hybrid Structures Of Carbon Nanotubes And Metal Nanowires

Dielectrophoretic assembly of carbon-based nanomaterials

Direction-Selective and Length-Tunable In-Plane Growth of Carbon Nanotubes

Multilevel, Multicomponent Microarchitectures of Vertically-Aligned Carbon Nanotubes for Diverse Applications

Direct Growth of Carbon Nanotube Junctions by a Two-Step Chemical Vapor Deposition