Abstract:The stress state is a crucial parameter for the design of innovative microelectromechanical systems based on silicon carbide (SiC) material. Hence, mechanical properties of such structures highly depend on the fabrication process. Despite significant progresses in thin-film growth and fabrication process, monitoring the strain of the suspended SiC thin-films is still challenging. However, 3C-SiC membranes on silicon (Si) substrates have been demonstrated, but due to the low quality of the SiC/Si heteroepitaxy, high levels of residual strains were always observed. In order to achieve promising self-standing films with low residual stress, an alternative micromachining technique based on electrochemical etching of high quality homoepitaxy 4H-SiC layers was evaluated. This work is dedicated to the determination of their mechanical properties and more specifically, to the characterization of a 4H-SiC freestanding film with a circular shape. An inverse problem method was implemented, where experimental results obtained from bulge test are fitted with theoretical static load-deflection curves of the stressed membrane. To assess data validity, the dynamic behavior of the membrane was also investigated: Experimentally, by means of laser Doppler vibrometry (LDV) and theoretically, by means of finite element computations. The two methods provided very similar results since one obtained a Young's modulus of 410 GPa and a residual stress value of 41 MPa from bulge test against 400 GPa and 30 MPa for the LDV analysis. The determined Young's modulus is in good agreement with literature values. Moreover, residual stress values demonstrate that the fabrication of low-stressed SiC films is achievable thanks to the micromachining process developed.

A Resonant Method for Determining the Residual Stress and Elastic Modulus of A Thin Film

Measuring stiffness and residual stress of thin films by contact resonance atomic force microscopy

Acoustoelastic determination of local surface stresses in polymethylmethacrylate

Study of Local Stress Using Stress-Absorbing Si Diaphragm

Measurement Of Young'S Modulus And Residual Stress Of Micromembranes

A Novel Approach to Study Patterned Thin Film Local Stress for Microelectronics Application

Measuring the elastic modulus and residual stress of freestanding thin films using nanoindentation techniques

A Novel Technique for Mechanical Characterization of Thin Elastomeric Membrane

Investigation of the Young's Modulus and the Residual Stress of 4H-SiC Circular Membranes on 4H-SiC Substrates

Modification of curvature-based thin-film residual stress measurement for MEMS applications

Determining mean and gradient residual stresses in thin films using micromachined cantilevers

Determining the Poisson’s ratio of thin film materials using resonant method

A new in situ residual stress measurement method for a MEMS thin fixed-fixed beam structure

Ultra-sensitive, Highly Reproducible Film Stress Characterization Using Flexible Suspended Thin Silicon Plates and Local Curvature Measurements

Evaluating Interface Effect On Stresses In Thin Films By A Local Curvature Metrology With High Accuracy And Resolution

Residual Stress Measurement in Thin Films Using a Slitting Method with Geometric Phase Analysis under a Dual Beam (FIB/SEM) System

A new method for high resolution curvature measurement applied to stress monitoring in thin films

The Dynamic Behavior Of Tensile Stress Thin Films

A simple analytical method for residual stress measurement on suspended MEM structures using surface profilometry

SIMULTANEOUS MEASUREMENTS OF THE MAGNETOSTRICTIVE COEFFICIENT,YOUNG'S MODULUS AND POISSON RATIO OF THE THIN FILM CONSIDERING THE THICKNESS OF FILM

The estimation of residual stresses by the brittle thin film’s initial cracks on a ductile substrate subjected to tensile stresses