Abstract:The microstructure and thermal conductivity of four groups of Mg-rare earth (RE) binary alloys (Mg-Ce, Mg-Nd, Mg-Y and Mg-Gd) in as-cast and as-solutionized states were systematically studied. Thermal conductivity was measured on a Netzsch LFA457 using laser flash method at room temperature. Results indicated that for as-cast alloys, the volume fraction of second phases increased with the increase of alloying elements. After solutionizing treatment, a part or most of second phases were dissolved in alpha-gmatrix, except for Mg-Ce alloys. The thermal conductivity of as-cast and as-solutionized Mg-RE alloys decreased with the increase of concentrations. The thermal conductivity of as-solutionized Mg-Nd, Mg-Y and Mg-Gd alloys was lower than that of as-cast alloys. Thermal conductivity of as-solutionized Mg-Ce alloys was higher than that of as-cast alloys, because of the elimination of lattice defects and fine dispersed particles during solutionizing treatment. Different RE elements have different influences on the thermal conductivity of Mg alloys in the following order: Ce < Nd< Y< Gd. Ce has the minimum effect on thermal conductivity of Mg alloys, because of the very low solubility of Ce in the alpha-Mgmatrix. The variations in the atomic radius of the solute elements with Mg atom (Delta r), valence, configuration of extranuclear electron of the solute atoms, and the maximum solid solubility of elements in the alpha-Mg matrix were suggested to be the main reasons for the differences in thermal conductivity of resulting Mg-RE alloys. (C) 2016 Published by Elsevier Ltd on behalf of The editorial office of Journal of Materials Science & Technology.

Thermal Conductivity of As-Cast and As-Extruded Binary Mg–Zn Alloys

Microstructure and Thermal Conductivity of As-Cast and As-Extruded Binary Mg–Mn Alloys

Thermal Characteristics of Mg–Zn–Mn Alloys with High Specific Strength and High Thermal Conductivity

Anisotropy of thermal conductivity and mechanical properties in Mg-5Zn-1Mn alloy

Effect of Zn content on microstructure, mechanical properties and thermal conductivity of extruded Mg-Zn-Ca-Mn alloys

Thermal and electrical conductivity of binary magnesium alloys

Microstructure-dependent Thermal Conductivity and Mechanical Properties in Cast Mg-4Sm-xAl Alloys

The Microstructure and Mechanical Properties of As-cast Mg-10Gd-3Y-xZn-0.6Zr (x=0, 0.5, 1 and 2 Wt%) Alloys

Effect of Extrusion Temperature on the Microstructure and Thermal Conductivity of Mg–2.0Zn–1.0Mn–0.2Ce Alloys

Recent Progress on Thermal Conductivity of Magnesium and Its Alloys

Microstructure, Mechanical and Thermal Properties of Mg-0.5Ca-xZr Alloys

Microstructure and Thermal Conductivity of Mg-2Zn-Zr Alloy

Microstructures and Mechanical Properties of As-Cast and As-Extruded Mg-4.50zn-1.13ca (wt%) Alloys

Microstructure and Mechanical Properties of Extruded Mg-Zn-Ca Alloy

Microstructure, Non-Basal Texture and Strength-Ductility of Extruded Mg-6Bi-3Zn Alloy

Microstructure and tensile properties of a low-alloyed magnesium alloy: effect of extrusion temperature

Microstructure and Thermal Conductivity of As-Cast and As-Solutionized Mg–Rare Earth Binary Alloys

Effects of Zn addition on microstructures and mechanical properties of as-extruded Mg-Zn-Ce-Zr alloys

Enhanced Mechanical Properties in Fine-Grained Mg–1.0Zn–0.5Ca Alloys Prepared by Extrusion at Different Temperatures

A review on thermal conductivity of magnesium and its alloys

Effect of Ce addition on thermal conductivity of Mg–2Zn–1Mn alloy