Abstract:High-performance polysilicon (P-Si) is fundamental as a resource for manufacturing semiconductor devices with high photoelectric properties. However, experimentally characterizing the solidification process in detail has been difficult on account of the extremely rapid cooling rate and limited available characterization methods. Therefore, this study used molecular dynamics (MD) to investigate Si crystallization behavior through directional solidification at different cooling rates. The entire system was first analyzed in terms of energy and radial distribution function, after which the microstructural evolution was characterized by visualization. Results indicated that the cooling rate significantly affected the directional solidification of Si, and an excessively high cooling rate resulted in a decrease in the long-range order of the system. At the same cooling rate, the crystallization rates of (1 0 0), (1 1 0), and (1 1 1) crystal faces followed a descending order. The configurations of the S-L interface with different crystal faces were distinct. Specifically, while the atom numbers of defect structures that were formed in systems of (1 0 0) and (1 1 0) crystal faces were few, those formed in the (1 1 1) crystal face were more. It was difficult for the (1 0 0) crystal face to form dislocations regardless of the crystallization degree at different cooling rates, and the (1 1 0) crystal face only formed a few dislocations at high cooling rates. Dislocations formed at all cooling rates during the directional solidification of the (1 1 1) crystal face, and there was a weak correlation between the number of dislocations and cooling rates. Twinning mainly occurred during the solidification process of the (1 1 1) crystal face, and there was no obvious linear relation between its number and the cooling rate. Moreover, when high-energy dislocations occurred more often, the system stability decreased. Overall, this work will be helpful to understand the commonness and difference in directional solidification of Si with different crystal faces at different cooling rates.

Crystal and Faceted Dendrite Growth of Silicon Near (1 0 0)

Optical anisotropy and strain-induced birefringence in dislocation-free silicon single crystals

Phase-field modeling of twin-related faceted dendrite growth of silicon

Grown-in Defects in Heavily Phosphorus-Doped Czochralski Silicon

Characterization of a Czochralski Grown Silicon Crystal Doped with 1020 Cm‐3 Germanium

Crystal growth of ferroelectric PbTiO 3 nanocrystals on silicon substrate via intermediates

Analysis of Structural Development and Defects during the Anisotropic Growth of Silicon

Phase Field Simulation Research on the Microstructural Evolution of Monocrystalline and Polycrystalline Silicon

Optical Anisotropy in Dislocation-Free Silicon Single Crystals

Faceting Simulation of Bulk Crystal Growth with 2d Nucleation and Screw Dislocation Theory

Lattice Bending, Disordering, and Amorphization Induced Plastic Deformation in a SiC Nanowire

Microstructure and Conductivity of Large Area Nanocrystalline Silicon Films Grown by Specially Designed Thermal-Assisted Chemical Vapor Deposition

Role of the Growth Facet on the Generation and Expansion of Stacking Faults in PVT-Grown N-Type 4H-Sic Single-Crystal Boules

Crystal Growth and Oxygen Precipitation Behavior of 300 Mm Nitrogen-Doped Czochralski Silicon

Crystal-originated Particles in Germanium-Doped Czochralski Silicon Crystal

Grain Boundary Development of Silicon during Directional Solidification: A Phase-Field Study

Orientation selection process during the early stage of cubic dendrite growth: A phase-field crystal study

Recognition and Imaging of Point Defect Diffusion, Recombination, and Reaction During Growth of Czochralski-Silicon Crystals

Pleomorphism and multidirectional combination of Si crystal nucleation during solidification

Nanofaceting of unit cells and temperature dependence of the surface reconstruction and morphology of Si(105) and (103)

Oriented and textured growth of (111) diamond on silicon using hot filament chemical vapour deposition