Abstract:The normal vector of migration direction in the solid-liquid interface of dendrites was used to describe the phase-field governing equation. By using the three angles formed by the normal vector for the migration direction of the dendritic growth interface and the coordinate axes of the simulation region, the authors expressed the interfacial anisotropy equation, and built a phase-field model for the competitive growth of multiple grains. Taking a Al-2%mole-Cu binary alloy as an example, the competitive growth of multiple grains during isothermal solidification was simulated by applying parallel computing techniques. In addition, the phase field simulation results were verified by the experimental method. The simulation results show that the competitive growth of equiaxed dendrite is divided into two types: the first occurs during the process of competitive growth, the tips of primary dendrite on different grains taking part in the competition stop growing in their optimal growth direction; the second also occurs during competitive growth, the tips of primary dendrite which participate in the competition on different grains never stop growing in their optimal growth direction. The dendritic morphologies of the first competition growth type are divided into two types. Primary dendrites of grains taking part in the competition stop growing in their optimal growth direction and the competition plane enlarges when neither one wins the competition. However, when one wins the competition, the primary dendrites of grains with superiority go through the blocking grains and continue to grow in their optimal growth direction. The primary dendrites of inferior grains stop growing in their optimal growth direction and then instead grow in those areas without obstacles. The dendritic morphology of the second competition-growth type is shown to be the deformation of primary dendrites, which are mainly represented as the deflection and bending observed from different views. Compared with the metallographic picture, the simulation results can show the morphology of the competitive growth in all directions, so this simulation method can better characterize the competitive growth process.

Phase-field modeling of twin-related faceted dendrite growth of silicon

Phase Field Method Simulation of Faceted Dendrite Growth with Arbitrary Symmetries

Phase-field crystal simulation facet and branch crystal growth

Simulation of Atypical Dendrite Growth in Ni–Cu Binary Alloy with Phase-Field Method

Phase-field Simulation of Tilted Growth of Dendritic Arrays During Directional Solidification

Phase-field Numerical Simulation of Three-Dimensional Competitive Growth of Dendrites in a Binary Alloy

Phase-field Simulation of Secondary Dendrite Growth in Directional Solidification of Binary Alloys

Numerical Simulation of Three-Dimensional Dendritic Growth Using Phase-Field Method

Phase-field modeling of complex dendritic structures in constrained growth of hexagonal close-packed crystals

Phase-Field Simulation of Three-Dimensional Dendritic Growth

Phase Field Simulation Research on the Microstructural Evolution of Monocrystalline and Polycrystalline Silicon

Phase-field Model of Dendrite Growth of Multicomponent Alloy with Multiple Grains

Orientation Dependence of Columnar Dendritic Growth with Sidebranching Behaviors in Directional Solidification: Insights from Phase-Field Simulations

Influence of Anisotropy on Dendritic Growth in Binary Alloy with Phase–Field Simulation

Phase-Field Model of Isothermal Solidification with Multiple Grain Growth

Three-Dimensional Phase-Field Crystal Modeling of Fcc and Bcc Dendritic Crystal Growth

Dependence of Si-Faceted Dendrite Growth Orientation on Twin Spacing and Undercooling

Phase-field Simulation of Dendritic Sidebranching Induced by Thermal Noise

Crystal and faceted dendrite growth of silicon near (100)

Phase-Field Simulation Studies of Dendrite Growth Coupling with Force Flow Field

Phase-field Modeling of Dendritic Growth under Forced Flow Based on Adaptive Finite Element Method