Abstract:The cadmium sulfide (CdS) n-type semiconductor is one of the most used as a window layer in thin-film solar cells, such as CdTe, CIS, CIGS, and CZTS. Optoelectronic properties are the most important characteristics for window materials. CdS thin films obtained using the chemical bath deposition technique (CBD) have been reported; however, large amounts of precursor solutions are used, which generate considerable amounts of toxic waste. The aim of this work is to reduce the amount of precursor solutions used for CdS growth; for this, it is necessary to consider an efficient position for the substrate inside the reactor container and at the same time allow obtaining CdS thin films with adequate physical properties to be applied in the photovoltaic solar cell development. CdS thin films were deposited on soda-lime/SnO2:F substrates (FTO) using the CBD technique; the substrates were placed in three different arrangements [rack system, step system (up), and step system (down)]. CdS samples with areas of 4 cm2 and a thickness of 27-48 nm were obtained; the X-ray diffraction patterns show CdS thin films with different polycrystalline structures. The morphological measurements reveal different surface formations depending on the substrate position, and resistivity values of around 105 Ω*cm were measured. UV-vis spectra show transmittance values of around 45-94% in the visible region with band gap energy values of around 2.1-2.36 eV. The best physical properties of CdS thin films and an efficient CBD process were obtained when the FTO substrates were located near the bottom of the reactor container with the FTO side down, leading to an optimal configuration that allows reducing the amount of precursor solutions and in this way reduces the toxic waste generated. These results are important in the photovoltaic technology process and environmental impact.

Deposition Methods and Properties of Polycrystalline CdS Thin Films

[Research on the Polycrystalline CdS Thin Films Prepared by Close-Spaced Sublimation].

Optical Transmission, Photoconductivity, and Morphology of Chemical Bath-Deposited CdS Thin Films for Optoelectronic Applications

Comprehensive Analysis of CdS Ultrathin Films Modified by the Substrate Position inside the Reactor Container Using the CBD Technique

An Optimized Multilayer Structure of CdS Layer for CdTe Solar Cells Application

Chemical Bath Deposition and Optical Properties of CdS Nanocrystalline Films with Tunable Electronic Band Gap

Cds Thin Films Deposited by Cbd Method on Glass

Electron Beam Evaporated Cadmium Sulphide Thin Films for Solar Cell Applications

Effect of Substrate and Zn Doping on the Structural, Optical and Electrical Properties of Cds Thin Films Prepared by Cbd Method

Properties of CdTe layers deposited by a novel method -Pulsed Plasma Deposition

In-situ Growth of a CdS Window Layer by Vacuum Thermal Evaporation for CIGS Thin Film Solar Cell Applications

Cu-doped CdS and its application in CdTe thin film solar cell

High-efficiency CdTe-based Thin-Film Solar Cells with Unltrathin CdS:O Window Layer and Processes with Post Annealing

Structural and Optical Analysis of Cds Thin Films Grown by Magnetron Sputtering Technique

Electrical Properties Of N-Type Cds And P-Type Cdte Thin Films In Cds/Cdte Solar Cells

Pulsed Laser Deposition Zns Buffer Layers for Cigs Solar Cells

To Study the Cadmium Sulphide Thin Films Synthesis by Simple Spin Coating Method for Energy Application

The study on saturation current and ideality factor of CdTe solar cell based on CdS window layer deposited with hydrogen peroxide

Physico-chemical analysis of the properties and stability of CdS and CdS:O to be applied in thin-film solar cells

Optical Properties of Cd1−xZnxS Thin Films for CuInGaSe2 Solar Cell Application

Structural and Optical Properties of Polycrystalline CdS Thin Films Deposited by Electron Beam Evaporation