Abstract:Amorphous Fe73.5-xCoxSi13.5B9Cu1Nb3（x=10,30,50） ribbons were prepared by the single copper wheel melt spinning technique in the air atmosphere.The nanocrystallization kinetics of amorphous ribbons was investigated by differential scanning calorimetry（DSC）.The apparent activation energies of amorphous ribbons were calculated by using Kissinger and Ozawa methods.It was found that the activation energies of the first crystallization reduce and those of the second crystallization rise with increasing Co content.The local Avrami parameter m for primary crystallization was calculated using Johnson-Mehl-Avrami（JMA） model.The values of the Avrami parameter showed that the primary crystallization mechanism of amorphous ribbons varied at different stages.In the initial stage,the crystallization mechanism was bulk crystallization with three dimensional nucleation and grain growth controlled by diffusion.In the following stage,it was surface crystallization with one dimensional nucleation and grain growth at a near zero nucleation rate.The variation of soft magnetic properties of nanocrystalline Fe63.5Co10Si13.5B9Cu1Nb3 powder cores as a function of milling time has been investigated.It was found that the effective permeability of the cores shows high frequency stability and decreases with increasing milling time.The quality factor increases with increasing frequency in the lower frequency range,reaches a maximum at the frequency of 80 kHz,and then decreases gradually with increasing frequency.

Crystallization Behavior and Temperature Dependence of the Initial Permeability of an FeCuNbSiB Alloy

In-Situ Thermomagnetic Behaviors of an FeCuNbSiB Alloy during Nanocrystallization Processes

High-temperature Magnetic Properties of Fe-based Nanocrystalline Alloy

Crystallization Kinetics and Magnetic Properties of Fe73.5si13.5b9cu1nb1v2 Nanocrystalline Powder Cores

Effect of Annealing Temperature on Permeability and Giant Magneto-Impedance of Fe-based Amorphous Ribbon

Elevated temperature initial permeability study of some ferromagnetic alloys

Crystallization kinetics and magnetic properties of Fe 63.5Co10Si13.5B9Cu 1Nb3 nanocrystalline powder cores

Crystallization Kinetics of Co-Finemet Amorphous Alloys and Magnetic Properties of Nanocrystalline Powder Cores

Nanocrystallization Kinetics of Amorphous Fe73.5Cu1Nb3−xMoxSi13.5B9 (x=1, 2, 3) Alloys

Quantitative Crystallization and Nano-Grain Size Distribution Studies of a Fecunbsib Nanocrystalline Alloy

Thermomagnetic Analysis of the Crystallization in Soft Magnetic Nanocrystalline Alloys

Effect of annealing temperature on structure and high-temperature soft magnetic properties of (Fe0.9Co0.1)72.7Al0.8Si13.5Cu1Nb3B8V1 nanocrystalline alloy

The Amorphous-To-Nanocrystalline Transformation In Fe73.5cu1nb3si13.5b9 Studied By Thermogravimetry Analysis

The Crystallization Kinetics Study of Finemet-Co Amorphous Alloys

Magnetic and structural behaviours of nanocrystalline Fe 70.8 Nb 3.7 Cu 1 Al 2.7 Mn 0.7 Si 13.5 B 7.6 alloy

Effect of V Substitution for Nb on the Crystallization Kinetics of FINEMET Amorphous Alloys

Curie temperature behaviour on annealing of Finemet type amorphous alloys

Effect of vacuum annealing and heating–cooling cycle annealing on the soft magnetic properties at room- and high-temperatures for nanocrystalline FeCoAlSiBCuNb alloy

Evolution from Amorphous to Nanocrystalline and Corresponding Magnetic Properties of Fe-Si-B-Cu-Nb Alloys by Melt Spinning and Spark Plasma Sintering

Study of Nanocrystallization Kinetics in Fe 73.5 Cu 1 Nb 3 Si 13.5 B 9 Finemet Type Alloy by Differential Thermal Analysis and Using Different Models

Dependence of the Magnetic Stability of Temperature on Annealing Temperature for Nanocrys-Talline Soft Magnetic Material