Abstract:This work presents the mixing wave generation of a novel surface acoustic wave (M-SAW) device for sensing in liquids. Two structures are investigated: One including two input and output interdigital transducer (IDT) layers and the other including two input and one output IDT layers. In both cases, a thin (1 μm) piezoelectric AlN layer is in between the two patterned IDT layers. These structures generate longitudinal and transverse acoustic waves with opposite phase which are separated by the film thickness. A 3-dimensional M-SAW device coupled to the finite element method is designed to study the mixing acoustic wave generation propagating through a delay line. The investigated configuration parameters include the number of finger pairs, the piezoelectric cut profile, the thickness of the piezoelectric substrate, and the operating frequency. The proposed structures are evaluated and compared with the conventional SAW structure with the single IDT layer patterned on the piezoelectric surface. The wave displacement along the propagation path is used to evaluate the amplitude field of the mixing longitudinal waves. The wave displacement along the AlN depth is used to investigate the effect of the bottom IDT layer on the transverse component generated by the top IDT layer. The corresponding frequency response, both in simulations and experiments, is an additive function, consisting of sinc(X) and uniform harmonics. The M-SAW devices are tested to assess their potential for liquid sensing, by dropping liquid medium in volumes between 0.05 and 0.13 μl on the propagation path. The interaction with the liquid medium provides information about the liquid, based on the phase attenuation change. The larger the droplet volume is, the longer the duration of the phase shift to reach stability is. The resolution that the output change of the sensor can measure is 0.03 μl.

Optimizations of Composited Acoustic Sensors with A Microfluidic Channel

Acoustic Energy Regulation and Quality Factor Improvement in Acoustic Liquid Sensors by Optimized Structural Design

Investigations Of Coupling Acoustic Matching In Multilayer Acoustic Structures

Ultrasensitive liquid sensor based on an embedded microchannel bulk acoustic wave resonator

A Film Bulk Acoustic Liquid Concentration Sensor Integrated with Microchannel

Investigation of the Liquid Loading Effect on the Flexible Acoustic Wave Devices for In-Liquid Sensing Applications

Design Optimization of Surface Acoustic Wave Devices and Investigation of Fabricated Devices under Temperature, Humidity and Steam Environments

Analysis of Viscosity Sensitivity for Liquid Property Detection Applications Based on Saw Sensors

Flexible and Transparent Surface Acoustic Wave Microsensors and Microfluidics

Optimization of Sensitivity Induced by Surface Conductivity and Sorbed Mass in Surface Acoustic Wave Gas Sensors

A mixing surface acoustic wave device for liquid sensing applications: Design, simulation, and analysis

Fabrication and Characterization of A Micromachined Acoustic Sensor with Integrated Optical Readout

Sensors Based on Saw and Fbar Technologies

Temperature Compensation In Fluid Density Measurement Using Micro-Electromechanical Resonant Sensor

An Acoustic Sensor Based on Active Fiber Fabry-Pérot Microcavities

A Temperature-Compensated Differential Microstrip Sensor for Microfluidic Applications

A Design of Metamaterial Inspired Resonator for Multifrequency Fluidic Sensors

Two-Dimensional Phononic Crystal Based Sensor for Characterization of Mixtures and Heterogeneous Liquids

On-chip dual-microcomb based fiber-optic acoustic mapper

Package-less liquid phase sensing using surface acoustic waves on lithium tantalate oxide