Abstract:The traditional surface acoustic wave（SAW） temperature sensors are facing the chanllenges of small temperature range and low sensitivity in measurement. In order to meet the high temperature detection requirement in harsh environment including industrial production and aerospace, a structure of interdigital transducer（IDT）/ALN/Sapphire was designed since the ALN can maintain good piezoelectric property at high temperatures. Modeling simulation and calculation comparison were developed to obtain the high temperature frequency coefficient（TCF）, and the excited Rayleigh wave mode was also used for the temperature calibration. The influences of the thickness of piezoelectric layer,metallization ratio and interdigital electrode thickness on Rayleigh wave velocity and electromechanical coupling coefficient were systematically studied respectively. In addition, the thickness of the ALN films on the TCF was also investigated. Results show that the wave velocity and electromechanical coupling coefficient can reach up to 5 780 m/s and 0.82% under ideal parameters. High quality C-axis oriented ALN thin films were deposited on Sapphire substrates by RF magnetron sputtering system, and then Pt/Ta electrodes were fabricated using MEMS technique. The temperature frequency coefficient of the SAW was about -53.5 ppm/℃, and it also had a good linear relationship between frequency and temperature at 800 ℃, which was consistent with the results of simulation. The sensor has the larger temperature measurement range and higher sensitivity than that of the traditional SAW temperature sensor.

Design and Investigation of a High-Performance Quartz-Based SAW Temperature Sensor

Comparative Study of SAW Temperature Sensor Based on Different Piezoelectric Materials and Crystal Cuts for Passive Wireless Measurement

High Temperature Surface Acoustic Wave Sensor with Strain Isolation Structure

Design and Characterization of Surface Acoustic Wave-Based Wireless and Passive Temperature Sensing System

Ultra-High Frequency Surface Acoustic Wave Sensors for Temperature Detection

Analytical And Finite Element Method Design Of Quartz Tuning Fork Temperature Sensor

Design and simulation of quartz tuning fork temperature sensor

Study and Design Sensitive Device of Resonance SAW Pressure Sensor

Analysis and Design of Thermo-Sensitive Quartz Tuning Fork Resonators for Temperature Sensors

Optimal Design Of A High-Resolution Smart Temperature Sensor Using Quartz Tuning Fork Resonator And Experimental Test Of Samples

High precision low power quartz temperature transducer

Simulation and Experimental Study of SAW Temperature Sensor Based on ALN Piezoelectric Layer

Application of Micromachined Quartz Tuning Fork Resonator for Temperature Sensing

A High Sensitivity Temperature Sensor Using High-<i>Q</i> NS-SAW Resonator

Study on a High-Precision Piezoelectric Resonators Quartz Crystal Temperature Sensor by Means of Three-Dimensional Finite Element Method

Temperature sensor with enhanced sensitivity based on silicon Mach-Zehnder interferometer with waveguide group index engineering.

Finite Element Method Design and Fabrication of Thermo-sensitive Quartz Tuning Fork Resonators as Temperature Sensor

Theoretical Model and Optimization of a Novel Temperature Sensor Based on Quartz Tuning Fork Resonators

Novel Designs for Quartz Tuning Fork Temperature Sensor

Development of Wireless and Passive SAW Temperature Sensor with Very High Accuracy