Abstract:The high toxicity of hydrogen sulfide combined with poor sensitivity at room operating temperature urge for the development of new sensitive materials for sensors complying with this requirement, as well as a fast response and low cost. In this work, we have successfully developed materials for surface acoustic wave (SAW) sensors sensitive to H2S gas that provide a reversible response at room temperature. The sensitive materials were created by plasma-enhanced chemical vapor deposition of a-CH films using methane as a precursor with argon and argon admixed with hydrogen or nitrogen and applied on piezoelectric quartz substrates. Smooth films, with an AFM root mean square below 1.5 nm, were obtained in all cases, although slight topographical variations were noted, depending on the gas types. XPS detected varying degrees of oxidation, indicating that the assisting gases played a crucial role in introducing oxygen-containing functional groups, thus influencing the material’s surface chemistry and sensitivity response. A hydrogen plasma treatment was applied on the a-CH deposited sensors as a further sensor preparation step. The hydrogen plasma treatment resulted in significant modifications in the topographical features, including roughness increase and notable variations in the surface aspect ratios, as confirmed through AFM data analysis, which involved advanced pixel height analysis and line profile processing. X-ray photoelectron spectroscopy (XPS) studies indicated the formation of new functional groups, increased defect density, and a significant reduction in electron transitions following hydrogen plasma treatment. The sensors demonstrated a reversible response to H2S gas within 8 to 20 ppm concentration ranges, effectively detecting these levels. The sensitivity of the sensors was significantly enhanced, up to 39% through hydrogen plasma treatment, reaching an improved overall performance in detecting low concentrations of H2S down to 0.9 ppm. These findings highlight a-CH thin films as an excellent candidate for next-generation SAW sensors. The study also suggests the potential for experimenting with various assisting gases during plasma deposition and additional plasma treatments to push detection capabilities to below ppm levels.

Optimization of Sensitivity Induced by Surface Conductivity and Sorbed Mass in Surface Acoustic Wave Gas Sensors

Theoretical optimizations of acoustic wave gas sensors with high conductivity sensitivities

Influence of surface conductivity on sensitivity of acoustic wave gas sensors based on multilayered structures.

Advances in sensing mechanisms and micro/nanostructured sensing layers for surface acoustic wave-based gas sensors

Theoretical Investigation of Conductivity Sensitivities of SiC-based Bio-Chemical Acoustic Wave Sensors

Modelling and Simulation using Finite Element Method of Surface Acoustic Wave Biosensor for Gas Detection Application

Research and Optimization on Novel SPW Sensor with a High Sensitivity by Using the Double Metal Layers Structure

Interface and Sensitive Characteristics of the Viscoelastic Film Used in a Surface Acoustic Wave Gas Sensor

Design Optimization of Surface Acoustic Wave Devices and Investigation of Fabricated Devices under Temperature, Humidity and Steam Environments

Finite Element Study for Mass Sensitivity of Love Surface Acoustic Wave Sensor with Si3N4-SiO2 Double-Covered Waveguiding Layer

Structural optimization and analysis of surface acoustic wave biosensor based on numerical method

Environmental Characteristics of Surface Acoustic Wave Devices for Sensing Organophosphorus Vapor

Optimal selection of piezoelectric substrates and crystal cuts for SAW-based pressure and temperature sensors

Simulation Study of FEUDT Structure Optimization and Sensitive Film Loading of SAW Devices

Performance Optimization of Plate-Mode Sensors with Bi-Layered Structure

Optimizations of Composited Acoustic Sensors with A Microfluidic Channel

Surface acoustic wave sensors and their applications

Optimization by Hydrogen Plasma Treatment of a-CH and Hydrogen/Nitrogen-Assisted a-CH Layers for SAW Sensors

The Development of Surface Acoustic Wave Sensor for Detecting Normal Gases

Recent Progress in Flexible Surface Acoustic Wave Sensing Technologies

Study on the Attributes of Transverse Surface Waves in a Layered Piezoelectric Semi-Space with Surface Elasticity Theory and Extended Stroh Formalism