Abstract:Achieving an optimal balance between mechanical properties, dielectric properties, and thermal shock resistance presents a significant challenge in the development of advanced ceramics. This study investigates Si3N4-BN composite materials, prepared by hot-press sintering with magnesium aluminum silicate (MAS) as the sintering additive, to assess the impact of varying hexagonal boron nitride (h-BN) content on their mechanical and dielectric properties, as well as their thermal shock resistance. At an h-BN content of 20 wt.%, the BN layers act as a toughening phase through a pull-out mechanism, minimally impacting the composite's density. This composition results in superior fracture toughness (7.4 MPa·m1/2), high strength (598 MPa), low dielectric constants (∼6.8), and dielectric loss (∼7.4×10-3). Notably, after a thermal shock at 1000°C, the composite exhibits a peak residual strength of 621 MPa, surpassing its initial strength. This enhanced performance is attributed to the formation of a dense Mg-Al-Si-B-O oxide glass layer on the surface during thermal shock, which not only repairs surface defects but also induces compressive stress. The development of the Si3N4-BN-MAS composite, with its outstanding comprehensive performance, marks a significant advancement for materials used in high-temperature wave transmission applications.

Inhibiting Crystallization Mechanism of H-Bn on Α-Cordierite in BN-MAS Composites

Influence of sintering temperature on the crystallization and mechanical properties of BN‐MAS composites

Effects of sintering temperature on the microstructure and properties of <i>h</i>-BN ceramics with MAS as liquid sintering aid

A Novel BN–MAS System Composite Ceramics with Greatly Improved Mechanical Properties Prepared by Low Temperature Hot-Pressing

Anisotropies in structure and properties of hot-press sintered h-BN-MAS composite ceramics: Effects of raw h-BN particle size

Effects of sintering temperature on the microstructure and properties of h-BN ceramics with MAS as liquid sintering aid

Effects of BN on the microstructural evolution and mechanical properties of BAS-BN composites

MAS-content Dependence of the Texture and Fracture Behavior of H-Bn-mas Composite Ceramics

High-pressure synthesis of Al<sub>2</sub>O<sub>3</sub>-cBN composites: Effect of thermodynamic condition and cBN volume fraction on their microstructure and properties

Effect of Boron Nitride Content on Mechanical、dielectric and Thermal Shock Resistance Properties of Si3N4-BN-MAS Composites

Enhanced thermal shock resistance of BN-based composites sintered by hot-pressing with the introduction of nano oxides

Influence of sintering pressure on the crystallization and mechanical properties of BN-MAS composite ceramics

Analysis of Mechanical Properties of Al2O3‐cBN‐hBN Composites and Identification of Main Influencing Factors

Thermal properties and thermal shock resistance of BAS-BN composite ceramics

Improvement of grain size and crystallization degree of LPSed h-BN composite ceramics by amorphization/nanocrystallization of raw h-BN powders

Effects of H-Bn on Mechanical Properties of Reaction Bonded Β-Sialon/h-bn Composites

Microstructural Evolution and Mechanical Properties of H-Bn Composite Ceramics with Y 2 O 3 –aln Addition by Liquid-Phase Sintering

Fabrication and properties of AL2O3-SiAlON composites with nano-sized t- and h-BN dispersion

Precipitation of BN crystals in SiBON ceramics and its mechanical properties

Effect of h-BN on the mechanical and dielectric properties of porous h-BN/Si3N4 composite ceramics prepared by gel casting