Abstract:This paper reports a novel MEMS accelerometer whose effective stiffness can be adjusted flexibly and even tuned to almost zero by using the electrostatic softening effect of two parallel plate capacitors: the comb-finger capacitor and the triangular capacitor. When applied to a biased voltage, the comb-finger capacitor provides a relatively large and nonlinear negative stiffness in the gap-varying direction, while the triangular capacitor produces a small yet linear negative stiffness in the area-varying direction. The proposed accelerometer is fabricated by using a standard silicon-on-glass manufacturing process and controlled by a customized digital circuit. An analytical model based on the pull-in dynamics as a result of the stiffness tuning is developed and simulated to investigate the dynamic behavior of the nonlinear accelerometer system. The proportion integral differential controller is utilized to improve the performance of the accelerometer while maintaining the stability of the closed-loop system operating with extremely low effective stiffness. The experimental results indicate that a two-fold increase of the sensitivity, a 30% reduction of Allan deviation bias instability, and a 20% reduction of Allan velocity random walk are achieved for the open-loop accelerometer system. A 75% decrease of the standard deviation bias instability and nearly two orders of magnitude improvement of the noise floor at 1 Hz for the closed-loop accelerometer system are realized when the effective stiffness is reduced to almost zero.

A New Method to Analyze the Stiffness of Mems Accelerometer

A Stiffness-Tunable MEMS Accelerometer

Analysis of the Frequency-Dependent Vibration Rectification Error in Area-Variation-Based Capacitive MEMS Accelerometers.

Thermal Stress Analysis of MEMS Accelerometer Based on Finite Element Method

A new method for calculating the microstructural stiffness of MEMS devices

A New Method For Calculating The Microstructural Stiffness Of Mems Devices - Art. No. 604005

A NEW METHOD FOR CALCULATING THE MICROSTRUCTURE'S STIFFNESS IN AN ACCELEROMETER

Study on the Mech Anical Stiffness of the Flexible Beams in a Micro-Machined Accelerometer

Precision Calculation for Stiffness of the Complex Microstructure

Stiffness Adjustable Optical MEMS Accelerometer

Analysis and Optimization on Dynamic Characteristics and Important Parameters of Force Feedback Accelerometer

Electromechanical Coupling Characteristics for Force-Balanced Vacuum Microelectronic Accelerometer

Structural Design and Testing of a Micromechanical Resonant Accelerometer

Design and Numerical Performance Analysis of a Microgravity Accelerometer with Quasi-Zero Stiffness

Electrometric Method for Measuring the Mechanical Parameters of a Comb-Finger Micro-Mechanical Accelerometer

Design and Sensitivity Analysis of a Micro-Resonant Accelerometer with Adjustable Stiffness

Simulation And Analysis Of Cantilever-Membrane Structure For Piezoresistive Micro-Accelerometers

Resonant Frequency Analysis for Spring-Mass Structure in High-G MEMS Accelerometer

A MEMS Resonant Accelerometer with High Relative Sensitivity Based on Sensing Scheme of Electrostatically Induced Stiffness Perturbation

A method of dynamic analysis for accelerometer base on separated time and space

A self-centering and stiffness-controlled MEMS accelerometer