Abstract:A novel micro-electromechanical systems inertial switch based on non-silicon surface micromachining technology has been designed, fabricated and characterized in the present work. Compared with the traditional inertial switch, a compliant cantilever beam as a stationary electrode has been proposed to prolong the contact time, which can realize sufficient elastic deformation during the contact between the electrodes. The dynamic contact process is analyzed theoretically and the corresponding mechanical impact mechanism is also explained. To investigate the contact-enhancing mechanism of the cantilever beam, the switch applied half-sine acceleration with various amplitudes in the sensitive direction is simulated with ANSYS software. The dynamic simulation results confirm the contact-enhancing mechanism described by the theoretical analysis and it is shown that the contact time (i.e., the switch-on time) can be prolonged effectively by utilizing the elastic deformation of the cantilever beam and increased with the applied accelerations. The inertial switch is successfully fabricated by electroplating and sacrificial layer processes technologies. The prototype has been characterized by dropping hammer experiment. The test results indicate that the contact effect is improved significantly and the contact time is ∼80 µs under the 297 g acceleration, and the maximum value is ∼410 µs for the 672 g acceleration amplitude, which is in general accordance with the simulated results. The mechanical contact between the cantilever beam and the proof mass is evaluated following thousands of impacts. The scanning electron micrographs of the contact surfaces indicate that the all-metal switch still keeps a good mechanical property after suffering the hot contact, and the contact resistance is also stable.

The simulation and visual test contact process of a MEMS inertial switch with flexible electrodes

Multi-physics Analysis of an Electrostatically Actuated Microcantilever in Viscous Fluids

A laterally-driven micromachined inertial switch with a compliant cantilever beam as the stationary electrode for prolonging contact time

A Low-g MEMS Inertial Switch Based on Direct Contact Sensing Method

Design, Simulation, and Fabrication of a New Three-Axis Inertial Switch with a Triangular Movable Electrode Structure

Design, simulation, and testing of a tunable MEMS multi-threshold inertial switch

The Design, Simulation and Fabrication of an Omnidirectional Inertial Switch with Rectangular Suspension Spring

Design and Experimental Validation of A Restoring Force Enhanced Rf Mems Capacitive Switch with Stiction-Recovery Electrodes

Design and Analysis of a Lateral Lateral DC-Contact MEMS RF Switch with High Performance

Inertial Micro-Switch Capable of Prolonging Contact Time

Implementation of Highly Reliable Contacts for RF MEMS Switches

Improved Test Fixture for Collecting Microcontact Performance and Reliability Data

Symmetrical Design And Analysis Of A Novel Mems-Based 1x2 Optical Switch

Intermittent Failure Mechanism and Stabilization of Microscale Electrical Contact

Numerical Analysis of Pull-In Voltage for Contact Mems Switches in Switched-Line Phase Shifter Application

Coupled-field finite element analysis of MEMS compound electrostatic actuator by using the ANSYS software

Design, optimization and simulation of a low-voltage shunt capacitive RF-MEMS switch

Micromachined Inertial Switch for Sub‐g Monitoring Using Gravity‐based Threshold Compensation

Fabrication of a Micromachined Capacitive Switch Using the CMOS-MEMS Technology

High-Isolation Contact Switch in Mems Phase Shifter

Design and fabrication of X-band capacitive MEMS switches