Abstract:A novel micro-electromechanical systems inertial switch based on non-silicon surface micromachining technology has been designed, fabricated and characterized in the present work. Compared with the traditional inertial switch, a compliant cantilever beam as a stationary electrode has been proposed to prolong the contact time, which can realize sufficient elastic deformation during the contact between the electrodes. The dynamic contact process is analyzed theoretically and the corresponding mechanical impact mechanism is also explained. To investigate the contact-enhancing mechanism of the cantilever beam, the switch applied half-sine acceleration with various amplitudes in the sensitive direction is simulated with ANSYS software. The dynamic simulation results confirm the contact-enhancing mechanism described by the theoretical analysis and it is shown that the contact time (i.e., the switch-on time) can be prolonged effectively by utilizing the elastic deformation of the cantilever beam and increased with the applied accelerations. The inertial switch is successfully fabricated by electroplating and sacrificial layer processes technologies. The prototype has been characterized by dropping hammer experiment. The test results indicate that the contact effect is improved significantly and the contact time is ∼80 µs under the 297 g acceleration, and the maximum value is ∼410 µs for the 672 g acceleration amplitude, which is in general accordance with the simulated results. The mechanical contact between the cantilever beam and the proof mass is evaluated following thousands of impacts. The scanning electron micrographs of the contact surfaces indicate that the all-metal switch still keeps a good mechanical property after suffering the hot contact, and the contact resistance is also stable.

Micromachined Inertial Switch for Sub‐g Monitoring Using Gravity‐based Threshold Compensation

A Low-g MEMS Inertial Switch Based on Direct Contact Sensing Method

Design, simulation, and testing of a tunable MEMS multi-threshold inertial switch

A laterally-driven micromachined inertial switch with a compliant cantilever beam as the stationary electrode for prolonging contact time

Design, Simulation, and Fabrication of a New Three-Axis Inertial Switch with a Triangular Movable Electrode Structure

Mechanical Design Optimization of A Single-Axis Moems Accelerometer Based on A Grating Interferometry Cavity for Ultrahigh Sensitivity

Micro-cantilever Shocking-Acceleration Switches with Threshold Adjusting and ‘On’-State Latching Functions

The Design, Simulation and Fabrication of an Omnidirectional Inertial Switch with Rectangular Suspension Spring

An In-Plane Low-Noise Accelerometer Fabricated with an Improved Process Flow

A Stiffness-Tunable MEMS Accelerometer

Design and simulation of a 2-axis low g acceleration switch with multi-folded beams

Low-G Triggered Acceleration Switch for Near-Zero Power Wake-Up Application.

A Novel Acceleration Switch with Hat-Like Contact Separated from Proof Mass

Inertial Micro-Switch Capable of Prolonging Contact Time

A seesaw-lever force-balancing suspension design for space and terrestrial gravity-gradient sensing

A Latching Acceleration Switch with Cylindrical Contacts Independent to the Proof-Mass

A Sensitive Three-Axis Micromachined Accelerometer Based on an Electrostatically Suspended Proof Mass

Low Voltage, High Speed and Small Area In-Plane MEMS Switch

A Self-Powered MEMS Inertial Switch for Potential Zero Power-Consumption Wake-Up Application

Switching Characteristics of Electrostatically Actuated Miniaturized Micromechanical Metallic Cantilevers

A Sensitive Micromachined Resonant Accelerometer for Moving-Base Gravimetry