Abstract:A novel heterogeneous integrated inertial micro-switch has been designed with adjustable acceleration threshold and a stable ‘on’-state due to a predefined bias voltage. The bias voltage is applied onto the large-area parallel-plate electrodes, which endows the movable proof-mass with electrostatic forces. With an external excitation acceleration, the movable electrode moves to the fixed electrode and it can be locked by the electrostatic force onto the compliant electrical contacts, which are composed of micro-cantilever array to eliminate the contact rebound during electrostatic pull-in process. Both the dynamic response of the proof-mass and the relationship between the bias voltage and the inertial excitation acceleration were analyzed using theoretical model and finite element simulation. A unique heterogeneous integration process including both the silicon-based and non-silicon surface micromachining processes was adopted to fabricate the switch. The tests using a standard dropping hammer system demonstrated that the switch could keep a stable switch-on at the 57 g excitation acceleration and 38 V bias voltage. As wide as 52% adjustment range of the acceleration threshold was obtained when the applied bias voltage was from 38 V to 44 V. The tested relationship between the bias voltage and the external acceleration was very consistent with the simulated relationship. [2019-0038]

Low-G Triggered Acceleration Switch for Near-Zero Power Wake-Up Application.

A Self-Powered MEMS Inertial Switch for Potential Zero Power-Consumption Wake-Up Application

A Low-g MEMS Inertial Switch Based on Direct Contact Sensing Method

The design, simulation and fabrication of a novel horizontal sensitive inertial micro-switch with low g value based on MEMS micromachining technology

Micro-cantilever Shocking-Acceleration Switches with Threshold Adjusting and ‘On’-State Latching Functions

An Approach to Near Zero Power Bi-Stable Driving With a Simple Pulse Signal for RF MEMS Switch

Self-Powered and Autonomous Vibrational Wake-Up System Based on Triboelectric Nanogenerators and MEMS Switch

A Zero Static Power Consumption Bi-Stable RF MEMS Switch Based on Inertial Generated Timing Sequence Method

Fabrication of a MEMS Inertia Switch on Quartz Substrate and Evaluation of Its Threshold Acceleration

Micromachined Inertial Switch for Sub‐g Monitoring Using Gravity‐based Threshold Compensation

A Novel Mems Shock Switch with Movable Contact Point to Prolong Contact Time

Design, Simulation and Fabrication of a Novel Contact-Enhanced MEMS Inertial Switch with a Movable Contact Point

A Novel Acceleration Switch with Hat-Like Contact Separated from Proof Mass

A 0.2 V Micro-Electromechanical Switch Enabled by a Phase Transition

A Heterogeneous Integrated MEMS Inertial Switch with Compliant Cantilevers Fixed Electrode and Electrostatic Locking to Realize Stable On-State

Development of a Shock Acceleration Microswitch with Enhanced-Contact and Low Off-Axis Sensitivity

The mechanical behavior investigation of MEMS switches for millimeter wave phase shifters

Micro‐Electromechanical Switch: A 0.2 V Micro‐Electromechanical Switch Enabled by a Phase Transition (small 14/2018)

Design And Simulation Of A Novel Horizontal Sensitive Inertial Micro-Switch With Low G Value

Design and simulation of a 2-axis low g acceleration switch with multi-folded beams

Development of a Novel MEMS Inertial Switch with a Compliant Stationary Electrode