Abstract:Multi-material additive manufacturing is crucial for intricate component fabrication, yet challenges, such as interfacial cracks and weak bonding, persist. This work investigated the laser powder bed fusion (L-PBF) of bimetallic components (stainless steel 304L-nickel-based alloy Inconel718) crucial in aerospace and nuclear applications. It is found that the interfacial cracks predominantly occur within the compositional transition zone where the proportion of 304 L is between 45 wt% and 75 wt%, characterized by brittle Laves phases along grain boundaries. Experimental and finite element simulations of melt pool reveal that a higher ratio of temperature gradient ( G̅ ) to the grain growth rate ( R̅ ) ( G̅ / R̅ ) results in straight grain boundaries with underdeveloped secondary dendrites. This leads to the formation of continuous liquid film and strip-like Laves phase at grain boundaries, causing interfacial cracks during L-PBF. To suppress these cracks, this work proposes manipulating grain boundaries into a tortuous morphology through promoting the growth of secondary dendrites. By controlling the G̅ / R̅ ratios below the critical value (<147.9×10 6 K∙s/m 2 ) and combining with a high cooling rate ( G̅ × R̅ ) during L-PBF, a well-developed secondary dendritic structure and grain refinement are achieved, significantly enhancing grain boundary tortuosity and forming discretely distributed Laves phases. As a result, interfacial cracks are completely suppressed, enabling the successful manufacturing of crack-free 304L-Inconel718 bimetallic components. The approach of tailoring the distribution of brittle precipitates through manipulating grain boundary morphology proposed in this work provides a novel and practical pathway for inhibiting cracks in multi-material additive manufacturing.

Liquation Cracking in Fiber Laser Welded Joints of Inconel 617

Liquid Film Migration in Laser Welded Joint of Inconel 617

Characterization of Heat Affected Zone Liquation Cracking in Laser Additive Manufacturing of Inconel 718

The Segregation and Liquation Crackings in the HAZ of Multipass Laser-Welded Joints for Nuclear Power Plants

In-situ Observation of Solidification Cracking of Laser Dissimilar Welded Joints

A Comparative Study on Fiber Laser and CO2 Laser Welding of Inconel 617

Microstructural Evolution and Liquation Cracking in the Partially Melted Zone of Deposited ERNiCrFe-13 Filler Metal Subjected to TIG Refusion

Study on the Weldability, Microstructure and Mechanical Properties of Thick Inconel 617 Plate Using Narrow Gap Laser Welding Method

Mechanism for Welding Liquation Cracking in a Boron Containing 9% Cr Martensitic Stainless Steel

Boundary Liquation and Interface Cracking Characterization in Laser Deposition of Inconel 738 on Directionally Solidified Ni-based Superalloy

Dendritic Microstructure and Hot Cracking of Laser Additive Manufactured Inconel 718 under Improved Base Cooling

Mechanism of the Crack Formation and Suppression in Laser-Mag Hybrid Welded 30crmnsia Joints

Pulsed Laser Spot Welding Thermal-Shock-Induced Microcracking of Inconel 718 Thin Sheet Alloy

Cracking Mechanism and Susceptibility of Laser Melting Deposited Inconel 738 Superalloy

The Defects and Microstructure in the Fusion Zone of Multipass Laser Welded Joints with Inconel 52m Filler Wire for Nuclear Power Plants

Liquefaction Characteristics and Cracking Behavior of the Grain Boundaries and Interdendritic Regions in Non-Weldable K447A Superalloy During Laser Re-Melting

Study on Solidification Cracking of Laser Dissimilar Welded Joints by Using In-Situ Observation and Numerical Simulation

Microstructure and Mechanical Properties of High Power CO2 Laser Welded Inconel 625 Nickel Based Alloy

Inhibition of interfacial cracks in 304L-Inconel718 bimetal fabricated via laser powder bed fusion

Liquation Cracking Susceptibility and Mechanical Properties of 7075 Aluminum Alloy GTAW Joints

Development of Evaluation Method for Solidification Cracking Susceptibility of Inconel600/SUS347 Dissimilar Laser Weld Metal by In-Situ Observation