Abstract:The microstructure of a carbon fiber‐reinforced ZrC matrix composite, Cf/ZrC, manufactured by reactive melt infiltration (RMI) was characterized by optical microscopy, X‐ray diffraction, scanning electron microscopy, electron backscattering diffraction (EBSD), and transmission electron microscopy. Characterization results revealed a heterogeneous microstructure typical of composites processed by RMI. The major features that were observed include ZrC single crystals in the matrix, Zr–ZrC eutectic phase, and the fiber/matrix interface. The hardness and modulus of ZrC single crystals and the eutectic phase were determined through micro‐ and nanoindentation. EBSD studies proved that ZrC matrix grains distribute randomly. Fiber bundle areas were examined and revealed poor intrabundle infiltration. Closer inspection of the ZrC crystals revealed the presence of never‐before reported inclusions. Analysis of the inclusions revealed their phase composition and a microstructural formation mechanism outlines their development during processing. The phase composition was proved to be nanosized α‐Zr with round or needle‐like shape. There are two plausible mechanisms for the formation of the inclusion. One is the trapping mechanism that some liquid zirconium from grain boundaries of ZrC grains may become trapped inside ZrC particles during their coalescence growth. The other is precipitation mechanism that α‐Zr may precipitate inside some ZrC grains during formation of Zr–ZrC eutectic phase or ZrC grains with deficient carbon under cooling.

Microstructure Characterization and Deposition Mechanism Studies of Zro2 Thin Films Deposited by Li-Mocvd

Fabrication and Characterization of Y2O3 Stabilized ZrO2 Films Deposited with Aerosol-Assisted MOCVD

Deposition of Y2O3 stabilized ZrO2 thin films from Zr(DPM)4 and Y(DPM)3 by aerosol-assisted MOCVD

Formation and Rate Processes of Y2o3 Stabilized Zro2 Thin Films from Zr(Dpm)(4) and Y(Dpm)(3) by Cold-Wall Aerosol-Assisted Mocvd

Formation and Rate Processes of Y[sub 2]o[sub 3] Stabilized ZrO[sub 2] Thin Films from Zr(DPM)[sub 4] and Y(DPM)[sub 3] by Cold-Wall Aerosol-Assisted MOCVD

Synthesis of YSZ film by solid single source PE-MOCVD method and characterization

PREPARATION AND TRIBOLOGICAL PROPERTIES OF TiO2-ZrO2 THIN FILMS

The structure and characterization of ZrO2 thin films prepared by liquid delivery-MOCVD

Mechanical Properties Of Zirconia Thin Films Deposited By Filtered Cathodic Vacuum Arc

Microstructure Study of Zno Thin Films on Si Substrate Grown by Mocvd

Deposition rate controls nucleation and growth during amorphous/nanocrystalline competition in sputtered Zr-Cr thin films

Simulation and experimental verification study on the process parameters of ZnO-MOCVD

Optimization of molar concentrations for enhanced crystallinity and bandgap tuning of ZrO2 thin films via spray pyrolysis for advanced optical applications

Thickness Dependence of the Crystallization and Phase Transition in ZrO 2 Thin Films

MOCVD Technology for PZT Thin Films

Atomic Layer Deposition of Zinc Oxide Films: Effects of Nanocrystalline Characteristics on Tribological Performance

Infrared And Raman Spectroscopic Studies Of Optically Transparent Zirconia (Zro2) Films Deposited By Plasma-Assisted Reactive Pulsed Laser Deposition

Microstructural characterization of YBa2Cu3O7-x thin films grown on Y-ZrO2

The effect of thickness and film homogeneity on the optical and microstructures of the ZrO2 thin films prepared by electron beam evaporation method

Microstructural Characterization of a Cf/ZrC Composite Manufactured by Reactive Melt Infiltration

Fabrication And Characterization Of Zro2 Hollow Spheres