Abstract:As a remote and in situ diagnostic technique for the first wall of tokamaks, laser-induced breakdown spectroscopy (LIBS) has shown promising potential for depth profile analysis of deposition layers on plasma-facing components (PFCs). However, due to the complexity of the interface of deposition layers and the limitations of laser profiles, achieving an accurate deposition layer thickness is often more difficult for an in situ LIBS system in tokamaks. In previous studies, a Laser Profile & Interface Roughness model (LPIR model), which considers the laser beam profile and interface roughness factors, has been developed to identify the interface of deposition layers. In this study, the effect of ablation rates from different materials in the deposited layers on the accuracy of their thickness has been investigated. The depth profiling of a Ni-Cu-Ni-Cu multilayer sample, which has a four-layer structure, has been carried out using the LIBS technique under different focusing conditions as well as various laser pulse energies, with the pressure maintained at 10-5 mbar. The LPIR model was used to reconstruct the depth distribution profile of the Ni-Cu-Ni-Cu multilayer sample and quantify the interfacial positions of the deposited layers. A layer thickness correction method for multilayer sample is proposed based on the dependence of the ablation rates of different layers on laser fluence. The correction ability has been evaluated based on the relative errors between the calculated and the scanning electron microscope (SEM) values for different layer thicknesses. The relative errors of the corrected layer thicknesses are all significantly improved, and the accuracy of the layer thicknesses has been substantially improved. The proposed method will not only help us better understand the LIBS depth profiling of multilayer samples under different laser fluence conditions, but it will also further improve the accuracy of the layer thickness analysis of multilayer samples. This result is of positive significance for the application of in situ LIBS diagnostics in plasma-wall interaction (PWI) studies. As a remote and in situ diagnostic technique for the first wall of tokamaks, laser-induced breakdown spectroscopy (LIBS) has shown promising potential for depth profile analysis of deposition layers on plasma-facing components (PFCs).

Depth profiling of nanometer thin layers by pulsed micro-discharge with inductively coupled plasma mass spectrometry

Depth Profiling of Nanometer Coatings by Low Temperature Plasma Probe Combined with Inductively Coupled Plasma Mass Spectrometry.

Depth Profiling Of Nanometer Thin Layers By Laser Desorption And Laser Postionization Time-Of-Flight Mass Spectrometry

Pulsed microdischarge with inductively coupled plasma mass spectrometry for elemental analysis on solid metal samples.

Depth Profiling of Metal Coating Circuit Board by Low Temperature Plasma-Inductively Coupled Plasma-Mass Spectroscopy System

Depth Profiling of Thin Films with Pulsed Glow Discharge Atomic Emission Spectrometry

Feasibility of applying microsecond-pulse glow discharge time of flight mass spectrometry in surface depth analysis

A demountable nanoflow nebulizer for sheathless interfacing nano-high performance liquid chromatography with inductively coupled plasma mass spectrometry

A microfluidic system for introduction of nanolitre sample in inductively coupled plasma mass spectrometry using electrokinetic flow combined with hydrodynamic flow

Experimental and model study of LIBS depth profile for multilayer deposition materials

Pulsed Radio-Frequency Discharge Inductively Coupled Plasma Mass Spectrometry for Oxide Analysis

Spark Ablation–inductively Coupled Plasma Optical Emission for Elemental Depth Profiling and Imaging

Feasibility of applying microsecond-pulse glow discharge time of flight mass spectrometry in surface depth analysis1This paper was published on the Special Issue from the BCEIA Conference in Shanhhai, China, October 1997.1

Weighting Ratio Correction Method for Depth Profiling Using Microsecond Pulsed Glow Discharge Mass Spectrometry

Buffer-gas Assisted High Irradiance Femtosecond Laser Ionization Orthogonal Time-of-flight Mass Spectrometry for Rapid Depth Profiling

Study of the Layer Thickness of Multilayer Sample by the LIBS Method Based on Ablation Rate Correction

A Simple and Demountable Capillary Microflow Nebulizer with A Tapered Tip for Inductively Coupled Plasma Mass Spectrometry

Sub-micrometer-scale Chemical Analysis by Nanosecond-Laser-induced Tip-Enhanced Ablation and Ionization Time-of-flight Mass Spectrometry

XPS depth profiling of nano-layers by a novel trial-and-error evaluation procedure

A Low-Cost Demountable Direct Injection High-Efficiency Nebulizer for Inductively Coupled Plasma Mass Spectrometry

Pulsed Micro-Discharge Ambient Ionization Mass Spectrometry