Abstract:Magnesium aluminate spinel (MgAl2O4) ceramics are high-performance and carbon-free materials widely used in both military and civilian fields. However, it is usually challenging to densify during the solid-state sintering process. The excellent properties of some rare earth oxides have been proved to promote the densification of MgAl2O4 spinel ceramics. But the mechanism of promoting sintering is not clear. In the present work, MgAl2O4 spinel ceramics have been successfully fabricated by co-doping CeO2 and La2O3 via a single-stage solid-state reaction sintering. The effects of addition amounts of CeO2 and La2O3 on phase compositions, microstructures, sintering characteristics, cold compressive strength, and thermal shock resistance of as-prepared MgAl2O4 spinel ceramics were systematically investigated. The results show that by co-doping CeO2 and La2O3 can increase the defect concentration due to the lattice distortion. This could promote the movement of Al3+ and Mg2+ at high temperature, which is beneficial to the formation of more secondary MgAl2O4 spinel. t-ZrO2 with more Ce4+ filling between spinel grains could prevent the growth of grains and promote the densification, besides the new-formed LaAlO3 that was mainly distributed along the grain boundary of the MgAl2O4 phase, both of which were favorable for the formation of dense microstructure of MgAl2O4 spinel materials. At the same time, the formation of more secondary MgAl2O4 spinel and sintering densification also improve the mechanical properties of spinel ceramics. La3+ will segregate to the spinel grain boundary, preventing grain boundary movement and absorbing the main crack's fracture energy. With 3 wt% CeO2 and 3 wt% La2O3 co-doping, the bulk density of the sample increased from 3.02 g∙cm−3 to 3.55 g∙cm−3; the apparent porosity decreased from 12.21% to 9.97%; the cold compressive strength increased from 172.88 MPa to 189.54 MPa; and the residual strength retention ratio after thermal shock increased from 84.92% to 89.15%.

Controlled fabrication of hierarchical MgAl 2 O 4 spinel/carbon fiber composites by crystal growth and calcination processes

Template-controlled Fabrication of Hierarchical Porous Zn–Al Composites with Tunable Micro/nanostructures and Chemical Compositions

Synthesis and Characterization of Monolithic ZnAl2O4 Spinel with Well-Defined Hierarchical Pore Structures Via a Sol-Gel Route

Interfacial Segregation and Precipitates Behavior in the Ultrafine Grained Al-based Metal Matrix Composites

From layered double hydroxide to spinel nanostructures: facile synthesis and characterization of nanoplatelets and nanorods

Novel Synthesis of High Surface Area MgAl2O4 Spinel As Catalyst Support

Effective Control of Microstructure Evolution in AZ91D Magnesium Alloy by SiC Nanoparticles in Laser Powder-Bed Fusion

Microstructure and properties of in situ generated MgAl2O4 spinel whisker reinforced aluminum matrix composites

Effect of Synthetic Parameters on Synthesis of Magnesium Aluminum Spinels

Synthesis and Characterization of Porous Magnesium Aluminate Spinel by Hydrothermal Process

A strategy for controlling microstructure and mechanical properties of microporous spinel (MgAl2O4) aggregates from magnesite and Al(OH)3

Synthesis of MgAl2O4Spinel Nanometer Powder Via Biology Polysaccharide Assisted Sol-Gel Process

Influence of the Temperature and Duration of the Annealing on the Lattice Structure and Growth of the Mg–Al Spinel Layer

Preparation of Magnesium Aluminate Spinel Nanofibers with High Temperature Resistance by Electrospinning Process Based on Non-Hydrolytic Sol-Gel Method

Effect of different MgO/Al2O3 ratios on microstructural densification, sintering process and mechanical property of MgAl2O4 materials

Effect of the citrate sol–gel synthesis on the formation of MgAl2O4 ultrafine powder

Preparation and Mechanical Properties of in Situ Submicron MgAl2O4p/6061Al Composites from Al–Mg–SiO2 System

The low temperature preparation of nanocrystalline MgAl2O4 spinel by citrate sol–gel process

Ionic Liquid‐assisted Hydrothermal Synthesis of Γ‐al2o3hierarchical Nanostructures

Preparation and properties of MgAl2O4 spinel ceramics by double-doped CeO2 and La2O3

Preparation and properties of hierarchical structural alumina/mullite composites