Abstract:This Paper reports the design, simulation and test of 3D microchannel networks intended for the 3D IC stackup cooling, vacuum building and even THz passive device applications. Recently, the prominent advantages of 3D IC integration, including reduction in system size, interconnect delay, power dissipation and enabling hyper-integration of chips from disparate process technologies, have drive the relentless research effort worldwide. Although various low-power methodologies are exploited, rapid increasing in device packing density in 3D stacking of chips have demanded revolutionary heat removal technologies, as high performance chips projected to dissipate more than 100W/cm(2) and require more than 100A of supply current are frequently integrated. Besides, high data rate and bandwidth interconnects are urgently needed as an efficient data transfer backbone between the chips comprising 3D ICs. To address these limits, the authors investigated 3D microchannel networks with various layouts such as fractal tree, which is embedded into stackup structures for highly efficient cooling, and as THz (terahertz) range waveguides.The 3D microchannel networks, with water as working medium are designed and simulated with computational fluidic dynamic methodology, which reveals both the flow and temperature fields and verifies their effectiveness in 3D stackup structure cooling. The 3D microchannels are further experimentally validated on a fast microsystem prototyping platform based on laminating multiple layers of Low Temperature Cofired Ceramic plates, which is capable of quickly realizing a complex exterior or interior 3D structures, for experimental validation. A testing system is set up, consisting of resistive heating source, temperature pickup device and microfluidic metering pumping devices. The temperature rises for samples with or without 3D microchannels with different configurations under various heat flux are obtained and compared with simulated results. The testing results shows that this embedded microfluidic cooling technique may effectively realized a decrease of around 60 centigrade at a heat flux of 1W/cm(2) and increase with the flux, confirming the effectiveness of this 3D microchannel in cooling a stackup structure and that of the simulation and modeling. Beside the microchannel, combined with sealed pipe I/O joints may effectively act as a ventilation pumping path for the vacuum buildup, adjustment and vacuum level inspection for 3D IC vacuum packaging.In addition, the authors present the investigations of the conceptional design of waveguide and functional structures operating at terahertz frequencies, together with the simulation results which demonstrate the prosperity of this simple structure for high data rate transmission in 3D IC stackups.

High-Efficiency Micromachined Sub-Thz Channels for Low-Cost Interconnect for Planar Integrated Circuits

Sub-THz Interconnect for Planar Chip-to-Chip Communications

THz Interconnect for Inter-/Intra-chip Communication

A Novel Dieletric Slot Stripline Structure for Millimeter Wave Flexible Printed Circuit

Two 10Gb/s/pin Low-Power Interconnect Methods for 3D ICs

An FDD-based Full-Duplex Sub-THz Interconnect with Data-rate of 22.6 Gb/s and Energy-Efficiency of 1.58Pj/bit

Wideband Circuit Model of Silicon-Based Interconnects Up to 50 GHz

Low-Loss Single-Band, Dual-Band, and Broadband mm-Wave and (Sub-)THz Interconnects for THz SoP Heterogeneous System Integration

Wafer-Scale Silicon Microfabrication Technology Toward Realization of Low-Cost Sub-THz Waveguide Devices

Three-Dimensional Interconnection With Magnetically Coupled Transition for W-Band Integration Applications

SiN-SOI Multilayer Platform for Prospective Applications at 2 Μm

Double-Shielded Interposer with Highly Doped Layers for High-Speed Signal Propagation

Analysis of Signal Propagation on High‐speed Planar Interconnect Systems Based on Full‐wave and Macromodeling Techniques

Silicon-on-Insulator Waveguide Devices for Broadband Mid-Infrared Photonics

Ultra-compact high efficiency and low crosstalk optical interconnection structures based on inverse designed nanophotonic elements

On-Chip Impedance-Optimized Microstrip Transmission Line For Multi-Band And Ultra-Wide-Band Microwave Applications

3D-Printed Dielectric Image Lines towards Chip-to-Chip Interconnects for subTHz-Applications

Low-Loss Waveguide Crossing for Complicated On-Chip Microwave Photonic Processor

Disentangling superconductor and dielectric microwave losses in submicrometer / interconnects using a multimode microstrip resonator

The Investigation Of 3d Embedded Microchannel Networks For 3d Ic Cooling, Vacuum Packaging And Thz Passive Device Applications

Modified Silicon Micromachining Process with Air Cavities and Silicon-to-air Transitions for Low-Loss Millimeter-Wave Antenna Tape-out