Abstract:High-temperature superconducting traction transformers (HTSTT) have the merits of small size and lightweight in comparison with their conventional counterparts. This article reports the development progress of a 6.6 MVA HTSTT operating at 65 K, including the design, testing, and system cooling. The introduction of flux diverters and an optimized winding design realized a short-circuit impedance higher than 43% and AC loss less than 3 kW. The insulation structure was designed to pass insulation tests specified in standard in China GB/T 25120-2010. An open cooling system with reduced pressure was developed, which realized the efficiency of the 6.6 MVA HTSTT above 99%. Before assembling the prototype transformer, we conducted tests for critical current and dielectric performance of the HTS double pancake coils (DPC) used in high-voltage (HV) and low- voltage (LV) windings to verify the current-carrying and insulation performances of each DPC. Finally, we measured the critical current and no-load loss of the HTSTT prototype at 77 K. Test results showed that the mass of the transformer is 33% less than conventional transformers. At 77 K, the critical current of the LV winding and HV winding is higher than 700 A and 50 A, respectively. Moreover, the HTSTT on a no-load test reached the test voltage of 25,000 V and loss of 6 kW. In the next step, we will continue to conduct experimental research, and verify the feasibility of the HTSTT on the train, and develop a circulating cooling system, all meeting the commercial requirements of the HTSTT.

Development of a 1250-Kva Superconducting Transformer and Its Demonstration at the Superconducting Substation

Development and Test in Grid of 630 Kva Three-Phase High Temperature Superconducting Transformer

Development of a Conduction-Cooled HTS SMES

Development of Online Monitoring and Controlling System for the 630 kVA Three-Phase High Temperature Superconducting Transformer

Development of a Three-Phase HTS Power Transformer

Winding Design and Electromagnetic Analysis for A 1250-Kva Hts Transformer

A Single Phase Model 9 Kva High-Temperature Superconducting Power Transformer

The Construction Progress of a High-Tc Superconducting Power Substation in China

Design, development, and testing of a 6.6 MVA HTS traction transformer for high-speed train applications

Development of a 45 Kva Single-Phase Model HTS Transformer

Design and Analysis of a 10 Kva HTS Transformer

Development of A 630 Kva Three-Phase Hts Transformer with Amorphous Alloy Cores

Recent Advances of HTS Power Application Research at IEE

Construction, Testing and Operation of A 1 Mj Hts Magnet at A 10.5 Kv Superconducting Power Substation

Design of a 10 Kva HTS Transformer Prototype

Design and Electromagnetic Analysis of Hybrid Megawatt High Temperature Superconducting Transformer

A Real-Time Measuring and Control System for the World's First HTS Power Substation

An Optimize Design of HTS Transformer:Multi-Width and Multi-Distance Structure

Testing and Demonstration of a 10-Ka HTS DC Power Cable

Development and Testing of a 300-Kvar HTS Synchronous Condenser Prototype

Development Of The World'S First Hts Power Substation