Abstract:Battery energy storage systems based on bidirectional isolated DC-DC converters (BIDCs) have been employed to level the output power of intermittent renewable energy generators and to supply power to electric vehicles. Moreover, BIDCs use high-frequency transformers (HFTs) to achieve voltage matching and galvanic isolation. Various studies have recently been conducted using soft magnetic materials, such as nanocrystalline, amorphous solids, and ferrite, to develop more compact and effective transformers with superior power densities. The HFTs in three-phase BIDCs are composed of three magnetic cores. However, this leads to low power density and high cost. Besides, the three-phase (3P) ferrite core has not been investigated for high-power converters such as 3P-BIDCs. This paper presents the design and development of a 3P-EE ferrite magnetic core for 3P-BIDCs. The area product design method was used to determine the core and winding design. The paper also proposes the use of the superposition theorem in conducting a magnetic circuit analysis to predict the flux density and magnetising inductance of the transformer core. Moreover, the use of the superposition theorem allowed the required air-gap length for balancing the distribution of flux density and magnetizing inductance in the transformer core to be determined. The balanced flux distribution and magnetizing inductance resulted in a uniform core loss and temperature in the transformer. This paper also presents the experimental results of the designed HFT operated in a 300-V, 3-kW 3P-BIDC. The experimental results showed that the proposed HFT achieved a balanced flux density and magnetizing inductance with a high power density and low cost. Moreover, the transformer performed at a maximum efficiency of 98.67%, with a decrease of 3.33 °C in the overall temperature of the transformer as compared to the transformer without air gaps.

Design and Electromagnetic Analysis of Hybrid Megawatt High Temperature Superconducting Transformer

The Design And Finite Element Analyses Of The Super-Long Ultrasonic Amplitude Transformer

Development of a Conduction-Cooled HTS SMES

An Optimize Design of HTS Transformer:Multi-Width and Multi-Distance Structure

Electromagnetic Field Analysis and Optimization Method of High-Temperature Superconducting Transformer under the Influence of Abnormal Voltage

Design and Testing of a Medium Frequency Transformer

Development of Multi-Domain Design Tool for Medium Voltage High Frequency Power Transformers

Stepped-shape Field Winding Optimization of a Large Capacity HTS Aircraft Propulsion Machine

The Conceptual Optimal Design of a 300MJ High Temperature Superconducting Magnet

Magneto-thermal coupling simulation and experimental verification for a three-winding high-frequency transformer

Design of a High-Voltage-Insulation and High-Efficiency Medium Frequency Transformer

Design and Experimental Verification of Three‐Phase Medium‐Frequency Transformers for High‐Power DC‐DC Applications

Modeling and Design of a Medium Frequency Transformer with High Isolation and High Power-Density

Design of a 35 kV high-temperature superconducting synchronous machine with optimized field winding

Electromagnetic Analysis Of An Air-Core Hts Transformer

Design of A 10 Mw Dual-Stator Superconducting Permanent Magnet Wind Power Generator

Modeling and Design of Insulation Structure for High Power Density Medium Voltage High-Frequency Transformers

Design and Analysis of a Three-Phase High-Frequency Transformer for Three-Phase Bidirectional Isolated DC-DC Converter Using Superposition Theorem

Modelling and Theoretical Analysis of an Air-Core Transformer with Strong Coupled Schemes

Design of Medium-Voltage High-Frequency Transformers Based on High-Thermal-Conductivity Insulation Material

High Temperature Superconducting Transformer Operating at an Increased Frequency of Alternating Current