Abstract:High-temperature superconducting traction transformers (HTSTT) have the merits of small size and lightweight in comparison with their conventional counterparts. This article reports the development progress of a 6.6 MVA HTSTT operating at 65 K, including the design, testing, and system cooling. The introduction of flux diverters and an optimized winding design realized a short-circuit impedance higher than 43% and AC loss less than 3 kW. The insulation structure was designed to pass insulation tests specified in standard in China GB/T 25120-2010. An open cooling system with reduced pressure was developed, which realized the efficiency of the 6.6 MVA HTSTT above 99%. Before assembling the prototype transformer, we conducted tests for critical current and dielectric performance of the HTS double pancake coils (DPC) used in high-voltage (HV) and low- voltage (LV) windings to verify the current-carrying and insulation performances of each DPC. Finally, we measured the critical current and no-load loss of the HTSTT prototype at 77 K. Test results showed that the mass of the transformer is 33% less than conventional transformers. At 77 K, the critical current of the LV winding and HV winding is higher than 700 A and 50 A, respectively. Moreover, the HTSTT on a no-load test reached the test voltage of 25,000 V and loss of 6 kW. In the next step, we will continue to conduct experimental research, and verify the feasibility of the HTSTT on the train, and develop a circulating cooling system, all meeting the commercial requirements of the HTSTT.

Design of a 10 Kva HTS Transformer Prototype

Design and Testing of a Medium Frequency Transformer

An Optimize Design of HTS Transformer:Multi-Width and Multi-Distance Structure

A Single Phase Model 9 Kva High-Temperature Superconducting Power Transformer

Development of a Three-Phase HTS Power Transformer

Development of a Conduction-Cooled HTS SMES

Design, development, and testing of a 6.6 MVA HTS traction transformer for high-speed train applications

Development of a 45 Kva Single-Phase Model HTS Transformer

Modeling and Design of a Medium Frequency Transformer with High Isolation and High Power-Density

Design And Demonstration Of A Sic-Based 800-V/10-Kv 1-Mw Solid-State Transformer For Grid-Connected Photovoltaic Systems

Theoretical Analysis and Experiment Research of High Temperature Superconducting Air-Core Transformer

General Design of HTS Transformer for EMU

High-voltage High-Frequency Transformer Design for a 7.2kv to 120V/240V 20kva Solid State Transformer

Development of Multi-Domain Design Tool for Medium Voltage High Frequency Power Transformers

General Design of a 300-Kvar HTS Synchronous Condenser Prototype

Development of A 630 Kva Three-Phase Hts Transformer with Amorphous Alloy Cores

Design and Electromagnetic Analysis of Hybrid Megawatt High Temperature Superconducting Transformer

Design of Current Lead for 50MVA HTS Transformer

Design study on 50 kJ HTS SMES for simulated dynamic experiment of electric power systems

Optimization of HTS Transformer Parameters and Analysis of AC Losses Under Harmonic Conditions

Development and Testing of a 300-Kvar HTS Synchronous Condenser Prototype