Abstract:It′s important that HTS tapes have lower thermal conductivity and higher transversal resistivity in order to reduce the heat leaks conducted along the tapes and AC losses in the high temperature superconducting system conduction-cooled by GM coolers. This paper presents an experimental investigation into the effects of pure Ag and AgAu alloys sheath materials on the properties of Bi(2223) multifilamentary tapes and the optimisation of conduction-cooled hybrid current leads made from copper and Bi(2223)/Ag or Bi(2223)/AgAu tapes. The thermal conductivity of the tapes were measured by cryogenic steady heat flux method and the resistance was measured by using standard DC four-probe method at low temperature. The results showed that the reduction of thermal conductivity by the addition of Au into the sheath material of Bi(2223) tapes was 650%, 750% and 850% lower than that of pure Ag sheathed Bi(2223) tapes and the increase of resistivity was 4.9, 10 and 19.4 times higher than that of pure Ag for the addition of 2.20%, 5.70% and 10.70%Au(atom ratio) respectively. And the study also attempts to optimise thermodynamically the conduction-cooled hybrid current lead by using a developed model, which took the irreversibility of commercial GM coolers, the contact resistance and thermal conductance into account. Predictions from the model showed that AgAu alloys were suitable candidate materials to replace Ag as sheath material of Bi(2223) tapes applied in HTS current leads. In addition, Bi(2223)/AgAu was a suitable material to be applied as the HTS section of hybrid current leads in conduction-cooled superconducting electric systems.

Design of Current Lead for 50MVA HTS Transformer

Study on Heat Leakage of Current Leads of 300 Kva HTS Transformer

Analysis and Design of a 100 Ka HTS Current Lead for CFETR

Hybrid Current Lead Design of Hts Smes

The design of current leads and bushings for 300kVA HTS transformer used on the electrical locomotive

An experiment on measuring the heat loss of the current lead of 300kVA HTS transformer

Optimal Design and Experimental Study on Gas Cooled Current Lead with Varying Cross-Section

Optimal Design and Thermal Analysis of Current Leads in Superconducting Energy Pipeline

Design and Analysis of High Temperature Superconducting Current Leads for CRAFT TF Magnet

An Optimize Design of HTS Transformer:Multi-Width and Multi-Distance Structure

Heat Leakage Measurement of Energy Pipeline Current Leads by Temperature Gradient Method

Numerical Analysis On Magnetic Field Of Hts Transformer With Different Geometry

Design and Development of 16-Ka HTS Current Lead for HMFL 45-T Magnet

Design of the 100 Ka High Temperature Superconducting Current Lead for CFETR

Structure, Design, and Test of 13 Ka HTS Current Lead

Design of Cryogenic Cooling System of a 35-Kv/3.5-mva Single-Phase HTS-Controllable Reactor

Design, Modification.and Test of the Conduction Cooled High-Current Current Leads for the Superconducting Magnet

Experimental Investigation and Modelling for the Optimisation of Conduction Cooled HTS Hybrid Current Leads for SMES

Study on High Temperature Superconducting Module of 10 Ka Current Lead for ITER

R&D ON SHUNT FOR HIGH SAFETY HTS CURRENT LEADS FOR ITER

Safety and efficiency of the resistive heat exchanger for HTS high-rated current leads