Abstract:It′s important that HTS tapes have lower thermal conductivity and higher transversal resistivity in order to reduce the heat leaks conducted along the tapes and AC losses in the high temperature superconducting system conduction-cooled by GM coolers. This paper presents an experimental investigation into the effects of pure Ag and AgAu alloys sheath materials on the properties of Bi(2223) multifilamentary tapes and the optimisation of conduction-cooled hybrid current leads made from copper and Bi(2223)/Ag or Bi(2223)/AgAu tapes. The thermal conductivity of the tapes were measured by cryogenic steady heat flux method and the resistance was measured by using standard DC four-probe method at low temperature. The results showed that the reduction of thermal conductivity by the addition of Au into the sheath material of Bi(2223) tapes was 650%, 750% and 850% lower than that of pure Ag sheathed Bi(2223) tapes and the increase of resistivity was 4.9, 10 and 19.4 times higher than that of pure Ag for the addition of 2.20%, 5.70% and 10.70%Au(atom ratio) respectively. And the study also attempts to optimise thermodynamically the conduction-cooled hybrid current lead by using a developed model, which took the irreversibility of commercial GM coolers, the contact resistance and thermal conductance into account. Predictions from the model showed that AgAu alloys were suitable candidate materials to replace Ag as sheath material of Bi(2223) tapes applied in HTS current leads. In addition, Bi(2223)/AgAu was a suitable material to be applied as the HTS section of hybrid current leads in conduction-cooled superconducting electric systems.

Optimal Design and Experimental Study on Gas Cooled Current Lead with Varying Cross-Section

Optimal Design and Thermal Analysis of Current Leads in Superconducting Energy Pipeline

Design, Modification.and Test of the Conduction Cooled High-Current Current Leads for the Superconducting Magnet

Design and Analysis of Four Different Current Leads for Superconducting DC Energy Pipeline

Design of Current Lead for 50MVA HTS Transformer

Research on Structure Optimization of Cold Dielectric High-Temperature Superconducting Cables

Optimization of Kiloampere Peltier Current Lead Using Orthogonal Experimental Design Method

Experimental Investigation and Modelling for the Optimisation of Conduction Cooled HTS Hybrid Current Leads for SMES

Analysis and Design of a 100 Ka HTS Current Lead for CFETR

Hybrid Current Lead Design of Hts Smes

Experimental Study on Heat-leakage of 100 A-Class PCL with Varying Cross Section

Design of Bi-based Superconducting Current Lead for SMES

Design and experimental research on a new structure of 20 kA ReBCO high temperature superconducting current lead

The design and optimization of ten thousand amps grade YBCO high temperature superconducting section

Conduction-Cooled YBCO HTS Current Lead for SMES Application

Demountable Coaxial Gas-Cooled Current Leads for MRI Superconducting Magnets

Study on Heat Leakage of Current Leads of 300 Kva HTS Transformer

Heal: Transfer Through a High Temperature Superconducting Current Lead at Cryogenic Temperatures

Heat Leakage Measurement of Energy Pipeline Current Leads by Temperature Gradient Method

Experimental Research of a 10 Ka HTS Current Lead Using YBCO Tapes

Effect of thermal contact resistance on heat generation in conduction-cooled binary current lead