Abstract:A superconducting magnet system is developed for the application of high-frequency gyrotrons at Wuhan National High Magnetic Field Center, China. The operating cost for the magnet is dominated by refrigeration power. To reduce the heat load for cryogenic systems, a pair of YBCO binary current leads is designed by consideration of the industrial concentration of type II high-temperature superconducting YBCO material. In this paper, a simulation model is proposed to perform the electromagnetic-thermal coupling analysis of these YBCO binary leads under different operating conditions by combining a partial element equivalent circuit method and finite volume method. The simulation code can improve computational efficiency and enable high-accuracy coupling between the electromagnetic field and heat transfer process. In the steady state, the heat leakage at the 4.2 K cold end of the YBCO binary leads depends mainly on the geometric parameters of the YBCO tape, especially the cross-sectional area of the copper layer in the YBCO tape. The cooling mode and liquid helium level also have a significant impact on the heat leakage level. The optimal outer diameter of the normal copper section is identified, and the optimum value is largely influenced by the effective cooling power imposed on the cold end of the normal copper section. In the transient state, simulations for the charging process and the loss of cooling accident are performed, along with a detailed analysis of the electromagnetic-thermal response features of the leads under these conditions. The results indicate that the YBCO binary current leads possess high thermal stability and an ample time margin for the magnet system to be demagnetized.

Conduction-Cooled YBCO HTS Current Lead for SMES Application

Development of a Conduction-Cooled HTS SMES

Design of Bi-based Superconducting Current Lead for SMES

Experimental Research of a 10 Ka HTS Current Lead Using YBCO Tapes

Hybrid Current Lead Design of Hts Smes

Control Design of a Modular Current Source Power Conditioning System for High Temperature SMES

The Design of YBCO Binary Current Leads and Its Electromagnetic-Thermal Coupling Analysis Based on PEEC and Finite Volume Method

Heal: Transfer Through a High Temperature Superconducting Current Lead at Cryogenic Temperatures

THE CURRENT LEADS AND THEIR ELECTRICAL INSULATION & THERMAL CONDUCTION FOR 35kJ SMES

Experimental Investigation and Modelling for the Optimisation of Conduction Cooled HTS Hybrid Current Leads for SMES

The design and optimization of ten thousand amps grade YBCO high temperature superconducting section

Design, Modification.and Test of the Conduction Cooled High-Current Current Leads for the Superconducting Magnet

Analysis and Design of a 100 Ka HTS Current Lead for CFETR

Optimal Design and Experimental Study on Gas Cooled Current Lead with Varying Cross-Section

Design and Development of 16-Ka HTS Current Lead for HMFL 45-T Magnet

Electromagnetic and Thermal Design of A Conduction-Cooling 150 Kj/100 Kw Hybrid Smes System

Design and experimental research on a new structure of 20 kA ReBCO high temperature superconducting current lead

Effect of thermal contact resistance on heat generation in conduction-cooled binary current lead

Design of the 100 Ka High Temperature Superconducting Current Lead for CFETR

The Operation Test of YBCO Binary Current Leads Developed for an NI REBCO Magnet

Analysis of Overcurrent Performance of YBCO Tape Considering Different Heat Exchange Conductions