Abstract:Glass fiber reinforced polymer laminated (GFRPL) composites are extensively used in the development of multiple loading and high performance engineering components. It consists of greater properties, such as enhanced strength-to-weight ratio, and exceptional thermal stability. This plays a vital role in advanced composite manufacturing, that includes automobile parts, aeroplane parts, spaceships, and sporting goods. During manufacturing, the polymeric laminates essentially require the joining procedure while assembling the structural applications; in such cases, the bolted joint is frequently used to connect the different structural components. In the structural design of two-component joints, the component is governed by the durability and joint strength rather than the component capacity. In the joint setup, many types of joints are used to connect the fibrous composite, i.e., adhesive joint, bolted joint, and riveted joint. This work enhanced the riveted joint efficiency of laminated composite plates. The neat GFRPL and modified GFRPL samples were developed at 1, 2, and 3 Wt.% loading of multiwall carbon nanotube (MWCNT). Herein, the effect of MWCNT on single-lap riveted joining behavior and feasibility was investigated. The lap joint aluminum blind rivet with a 5 mm diameter was used to join the two composites' specimens. The tensile test of single lap riveted joint specimen, impact, and Shore D hardness tests were performed to analyze the composite's shear strength, energy absorption, and hardness. The outcome showed that the MWCNT loading enhances the shear strength, ductility, and hardness. The findings revealed that the higher shear strength and maximum failure load capacity were obtained for GFRPL samples modified by 1 Wt.% supplement of MWCNT as compared to the neat GFRPL, 2 and 3 Wt.% samples. The net tension failure occurred between the hole and the structure's side edges. Optimizing the geometrical configuration of the single-lap riveted joint helps reduce bearing failure and applied net tension. The analysis of the riveted joint revealed its potential for further structural applications. Further, the morphological investigation of the fracture surface of the tested specimens and the elemental composition of the developed nanocomposites was explored.

Mechanical and electrical properties of MWCNT/PP films and structural health monitoring of GF/PP joints

Interfacial Strengthening and Self-Monitoring in Carbon Fiber-Reinforced Composites via Carbon Nanotube-Based Damage Sensors

Nanocomposites of Poly(vinylidene Fluoride) with Multiwalled Carbon Nanotubes

Disassembly Study of Ultrasonically Welded Thermoplastic Composite Joints via Resistance Heating

Damage detection of FRP structures using the electrical resistance response of MWCNTs networks in a PDMS film substrate

Damage sensing in multi-functional nanocomposite polymer bonded energetics with embedded multi-walled carbon nanotube sensing networks

Enhanced Electrical Conductivity and Interlaminar Fracture Toughness of CF/EP Composites via Interleaving Conductive Thermoplastic Films

Mechanical Properties and Biocompatibility of Functionalized Carbon Nanotubes/polypropylene Composites

A study on the formation and failure mechanisms of CF/PPS-metal induction welding joints strengthened by micro-pins

On-line tensile damage monitoring of WGF/epoxy T-joint by the embedded MWCNT@WGF sensor

A nanomodified-ultrasonic method to improve the shear strength of adhesively bonded composite joints

Melt extrudate swell behavior of multi‐walled carbon nanotubes filled‐polypropylene composites

Structural Health Monitoring of Composite Laminates in Thermoplastic Induction Welded Joints using Electromagnetic Field Technique

A CNT-Toughened Strategy for In-Situ Repair of Aircraft Composite Structures

Improving the Efficiency of Single Lap Riveted Joints in the Carbon Nanofiller Reinforced Laminated Polymer Composites

The Injected Foaming Study of Polypropylene/Multiwall Carbon Nanotube Composite with In Situ Fibrillation Reinforcement

Effect of NH2-MWCNTs sprayed carbon fiber on the mechanical properties of carbon fiber reinforced polycarbonate composite for lightweight structural applications

In-Situ Monitoring of a Filament Wound Pressure Vessel by the MWCNT Sensor under Hydraulic Fatigue Cycling and Pressurization.

Digital light processing of multi-walled carbon nanotubes-reinforced photosensitive resin composites: Effects on microstructures and mechanical properties

Lap shear properties of CF/PEKK composites through nanoparticle-enhanced adhesive joints

Experimental and numerical investigation on temperature field and joint tensile failure for CF/PPS-Al alloy interlocking induction welding