A CNT-Toughened Strategy for In-Situ Repair of Aircraft Composite Structures
Tengfei Yang,Shiyong Chu,Bin Liu,Fei Xu,Bo Wang,Chengwei Wu
DOI: https://doi.org/10.3390/ma15217691
IF: 3.4
2022-11-02
Materials
Abstract:This study aimed to develop an in-situ field-repair approach, especially for aircraft composite structures, to enhance the interlaminar toughness of plain-woven composites (PWCs) by adding multi-walled carbon nanotubes (MWCNTs). MWCNTs were dispersed at each interface between prepreg layers by means of solvent spraying, with a density of 1.58 g/m2. Then, the layers were stacked with the predefined sequence and cured at 120 °C and 1 bar pressure, using a heat-repairing instrument. A standard double cantilever beam (DCB) test was used to investigate the interlaminar toughening effect that was due to the MWCNTs. For comparison, original samples were also prepared. The results indicated that the introduction of MWCNTs can favorably enhance the interlaminar toughness of PWCs in a field-repair approach and the Mode I fracture energy release rate, GIC, increased by 102.92%. Based on the finite element method (FEM) of continuum damage mechanics, the original samples and the MWCNTs toughening specimen under DCB Mode I fracture were modeled and analyzed. The simulation and the experiment were in good agreement. Finally, when the toughening mechanism of MWCNTs was explored with a scanning electron microscope (SEM), we found that a large amount of fiber-matrix (F-M) interface debonding and matrix cracking in mountain shape were the major modes of fracture, accompanied by a small amount of fiber breakage and matrix peeling for the MWCNTs-toughening specimens.
materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering