Abstract:The intricate multiphysics coupling conditions and nonlinear characteristics inherent in carbon fiber composite induction welding render the temperature transfer properties of the interface and the fusion connection mechanism across different scales ambiguous. In this study, a transient 3D finite element model was developed to simulate the induction welding process of carbon fiber reinforced polyphenylene sulfide (CF/PPS) composites, utilizing an electromagnetic-thermal multiphysics coupling mechanism. This investigation revealed that the electromagnetic effect leads to the accumulation of magnetic flux and spatial constraints, thereby triggering an eddy current concentration effect at the interface, which serves as an additional influencing factor in induction welding's edge effect. Simultaneously, the temperature distribution at the induction welding interface exhibits a gradient characteristic over both time and space: fluctuations in the current heat source result in a pronounced gradient distribution pattern of 225 %-680 % in welding interface temperature differences, accompanied by a 43.29 % reduction in shear strength. Notably, this study delves into the intricate origin of the induction welding heat source, elucidating that the generation of induced current in the magnetic field by carbon fiber overlap contributes to volumetric heat induction. This facilitates the welding process to some extent, despite the significantly lower heat contribution compared to thermally conductive wire meshes. In conclusion, to gain deeper insights into the impact of heat input on the fusion behavior of the bonding interface, SEM analysis was conducted on the experimental samples to examine the fusion morphology of the induction welding interface. Additionally, the method of EDS elemental analysis has also been used to investigate the generation and fusion mechanisms of welding defects. The amalgamation of numerical simulation technology and multi-scale material characterization serves as a methodological guide for researching the welding mechanisms of composite materials and even extends to investigations within the domain of metal connections. Furthermore, it paves the way for exploring a multidimensional research horizon in the realm of material joining and molding.

A study on the formation and failure mechanisms of CF/PPS-metal induction welding joints strengthened by micro-pins

Strengthening of Composite T-joints Using Ø 0.11 Mm Z-pins Via an Ultrasound-Guided Insertion Process

Experimental and numerical investigation on temperature field and joint tensile failure for CF/PPS-Al alloy interlocking induction welding

Effect of Ø 0.11 Mm Z-pinning on the Properties of Composite Laminates Via an Ultrasound Guided Insertion Process

A Novel Method for Through-Thickness Reinforcement of Laminated Composites Using Discrete Micro-Polarization-induced Fiber Injection (DMFI) Approach

DIC/DSI Based Studies on the Local Mechanical Behaviors of HR3C/T92 Dissimilar Welded Joint During Plastic Deformation

Enhancing the Robustness of Hybrid Metal-Composite Connections Through 3D Printed Micro Penetrative Anchors

Influence of the Textile Reinforcement on the Joint Formation of Pin-Joined Composite/Metal Parts

Fiber orientation in continuous fiber-reinforced thermoplastics/metal hybrid joining via multi-pin arrays

Temporal spatial transfer characteristics and cross-scale fusion behavior mechanism of interface temperature in induction welding of plain carbon fiber polyphenylene sulfide

A Finite Element Model for Predicting the Static Strength of a Composite Hybrid Joint with Reinforcement Pins

Mechanical and electrical properties of MWCNT/PP films and structural health monitoring of GF/PP joints

Progressive failure analysis of z-pin reinforced composite pi joints

Exploring the influence of pin geometry on metallurgical and mechanical characteristics of dissimilar aluminum TIG welds via friction stir processing

Welding and Riveting Hybrid Bonding of 6061 Al and Carbon Fiber Reinforced Composites

Ultrasonic welding of CF/PPS composites with integrated triangular energy directors: melting, flow and weld strength development

Predicting Welding Residual Stress of a Multi-pass P92 Steel Butt-Welded Joint with Consideration of Phase Transformation and Tempering Effect

Interfacial Microstructure and Mechanical Properties of the Al/Ti Joint by Magnetic Pulse Welding

Balance Interlaminar Improvement and In-Plane Adverse Impact of Hexagonal Semi-Embedded Fine Z-pin Reinforced Polymer Composite

Friction stir spot welding of 5052 aluminum alloy to carbon fiber reinforced polyether ether ketone composites

Study on microstructures and mechanical performance of laser transmission welding of poly-ether-ether-ketone (PEEK) and carbon fiber reinforced PEEK (CFR-PEEK)