Abstract:The intricate multiphysics coupling conditions and nonlinear characteristics inherent in carbon fiber composite induction welding render the temperature transfer properties of the interface and the fusion connection mechanism across different scales ambiguous. In this study, a transient 3D finite element model was developed to simulate the induction welding process of carbon fiber reinforced polyphenylene sulfide (CF/PPS) composites, utilizing an electromagnetic-thermal multiphysics coupling mechanism. This investigation revealed that the electromagnetic effect leads to the accumulation of magnetic flux and spatial constraints, thereby triggering an eddy current concentration effect at the interface, which serves as an additional influencing factor in induction welding's edge effect. Simultaneously, the temperature distribution at the induction welding interface exhibits a gradient characteristic over both time and space: fluctuations in the current heat source result in a pronounced gradient distribution pattern of 225 %-680 % in welding interface temperature differences, accompanied by a 43.29 % reduction in shear strength. Notably, this study delves into the intricate origin of the induction welding heat source, elucidating that the generation of induced current in the magnetic field by carbon fiber overlap contributes to volumetric heat induction. This facilitates the welding process to some extent, despite the significantly lower heat contribution compared to thermally conductive wire meshes. In conclusion, to gain deeper insights into the impact of heat input on the fusion behavior of the bonding interface, SEM analysis was conducted on the experimental samples to examine the fusion morphology of the induction welding interface. Additionally, the method of EDS elemental analysis has also been used to investigate the generation and fusion mechanisms of welding defects. The amalgamation of numerical simulation technology and multi-scale material characterization serves as a methodological guide for researching the welding mechanisms of composite materials and even extends to investigations within the domain of metal connections. Furthermore, it paves the way for exploring a multidimensional research horizon in the realm of material joining and molding.

Experimental and numerical investigation on temperature field and joint tensile failure for CF/PPS-Al alloy interlocking induction welding

DIC/DSI Based Studies on the Local Mechanical Behaviors of HR3C/T92 Dissimilar Welded Joint During Plastic Deformation

A study on the formation and failure mechanisms of CF/PPS-metal induction welding joints strengthened by micro-pins

Temporal spatial transfer characteristics and cross-scale fusion behavior mechanism of interface temperature in induction welding of plain carbon fiber polyphenylene sulfide

An Insight into the Creep-Fatigue Damage Localization in Welded Joints Based on Crystal Plasticity Finite Element Method

Thermal, metallurgical and mechanical analysis of circumferentially multi-pass welded P92 steel pipes

Combined Calorimetry, Thermo-Mechanical Analysis and Tensile Test on Welded EN AW-6082 Joints

Numerical and experimental study on thermal-metallurgical-mechanical behavior of high-strength steel welded joint

Residual Stress Modeling of Narrow Gap Welded Joint of Aluminum Alloy by Cold Metal Transferring Procedure

Tensile Behaviors and Mechanical Property Analyses of T-Welded Joint for Thin-Walled Parts in Consideration of Different TIG Welding Currents Using Multiple Damage Models and Fracture Criterions: Numerical Simulation and Experiment Validation

Experimental and Numerical Study on Local Mechanical Properties and Failure Analysis of Laser Welded Dp980 Steels

Predicting Welding Residual Stress of a Multi-pass P92 Steel Butt-Welded Joint with Consideration of Phase Transformation and Tempering Effect

Tensile failure analysis of laser stake-welded T-joints: X-ray tomography based conformal finite element and fractal theoretical approaches

Tensile resistance, microstructures of intermetallic compounds, and fracture modes of welded steel/aluminum joints produced using laser lap welding

Numerical Modelling and Experimental Verification of Thermal Characteristics and Their Correlations with Mechanical Properties of Double-Sided Laser Welded T-joint

Effect of welding residual stress on the performance of CFST tubular joints

Welding-induced stresses and distortion in high-strength steel T-joints: Numerical and experimental study

Influence of processing parameters on joint shear performance in laser direct joining of CFRTP and aluminum alloy

Mechanical Characterization and Prediction of Aluminum Alloy Laser Welding Joints Including Roles of Geometries and Porosity

The Effect of Postprocessing on Tensile Property and Microstructure Evolution of Friction Stir Welding Aluminum Alloy Joint

FE analysis of residual stress and welding deformation of a low-alloy UHS quenched steel fillet joint