Abstract:Active sensing using ultrasonic guided waves (UGW) is widely investigated for monitoring possible damages in composite structures. Recently, a novel diagnosed film based on a circuit-printed technique with piezoelectric lead zirconate titanate (PZT) transducers has been developed. The diagnostic film is a replacement for the traditional cable connection to PZT sensors and has been shown to significantly reduce the weight of the host structure. In this work, the diagnosed films were embedded into composite structures during manufacturing using a novel edge cut-out method during lay-up, which allowed for edge trimming after curing. In this paper, the effect of fatigue loading on the integrity of PZT transducers is initially investigated. The electro-mechanical impedance (EMI) properties at different fatigue loading cycles were used as the diagnostic measure for the performance of the sensors. At the same time, the behaviours of UGW were investigated at different fatigue loading cycles. It was found that the EMI properties and active sensing behaviours remained stable up to 1 million cycles for the force ranges of 0.5~5 kN and 1~10 kN. Next, the effect of embedding the diagnosed film on the mechanical properties of the host composite structure was investigated. Tensile and compressive tests were conducted and the elastic modulus of composite coupons with and without embedded PZT diagnosed films were compared. The elastic modulus of composite coupons with PZT diagnosed films embedded across the entire coupon reduced by as much as 20% for tensile tests and just over 10% for compressive tests compared to the coupons without embedded sensors. These reductions are considered the worst-case scenario, as in real structures the film would only be embedded in a relatively small area of the structure.

Structural Health Monitoring of Composite Laminates in Thermoplastic Induction Welded Joints using Electromagnetic Field Technique

Self-sensing Joints for In-Situ Structural Health Monitoring of Composite Pipes: A Piezoresistive Behavior-Based Method

Structural health monitoring of carbon fiber reinforced matrix by the resistance variation method

Macro-composites Containing Ferromagnetic Microwires for Structural Health Monitoring

Nondestructive Damage Detection of a Magentostricive Composite Structure

Real-time self-monitoring and smart bend recognizing of fiber-reinforced polymer composites enabled by embedded magnetic fibers

Application of piezoelectric MFC sensors and fiber Bragg grating sensors in structural health monitoring of composite materials

Multifunctional composite material based on piezoelectric nanofibers and Cu-CFRP electrodes for sensing applications

Structural Health Monitoring of Fiber Reinforced Composites Using Integrated a Linear Capacitance Based Sensor

Structural Integrity Assessment of Composites Plates with Embedded PZT Transducers for Structural Health Monitoring

Evaluation of Fatigue Damage Monitoring of Single-Lap Composite Adhesive Joint Using Conductivity

Mfc-Based Structural Health Monitoring Using A Miniaturized Impedance Measuring Chip for Corrosion Detection

Integration Technology with Thin Films Co-Fabricated in Laminated Composite Structures for Defect Detection and Damage Monitoring

Structural Health Monitoring of Composites Using Integrated Ultrasonic Transducers

Damage evaluation in plain-woven CFRP plate with circular hole under cyclic tensile loading using electrical impedance tomography

Structural health monitoring of carbon nanotube-modified glass fiber-reinforced polymer composites by electrical resistance measurements and digital image correlation

Damage monitoring of pinned hybrid composite-titanium joints using direct current electrical resistance measurement

Structural Health Monitoring Using Electro‐mechanical Impedance Sensors

Damage assessment of smart polymer-matrix sandwich composite using multi-physics responses of in-situ piezoelectric transducers

Damage detection of FRP structures using the electrical resistance response of MWCNTs networks in a PDMS film substrate

Smart Self-Sensing Piezoresistive Composite Materials for Structural Health Monitoring