Abstract:Static and dynamic mechanical behavior monitoring of composite hybrid bonded‐riveted joints using MXene sensors. Composite adhesive rivet hybrid connection structure has been more and more recognized and applied in aerospace, automobile, and other industries due to its high strength, corrosion resistance, and good stability. However, due to the particularity of the composite structure and the complex nonlinear coupling factors existing in the bearing process of the adhesive rivet hybrid connection structure, it is difficult to carry out structural health monitoring of the composite adhesive rivet hybrid connection structure. In this paper, a new fabrication technique is proposed to fabricate MXene thin film sensors with excellent performance. The MXene sensor can be tailored to the required size and arrangement to monitor the hybrid connection structure. The multi‐stage loading‐unloading test verifies the feasibility of using the MXene sensor to monitor the hybrid connection structure. The monitoring curves of the MXene sensor for composite adhesive rivet mixed connection structure specimens under low‐speed impact test and vibration fatigue test were obtained, and the sensing mechanism of the MXene sensor was explained. The proposed monitoring method based on the MXene sensor is suitable for the health monitoring of adhesive rivet hybrid connection structures under tensile‐compression, impact, and vibration conditions. Highlights MXene sensors can be integrated into composite hybrid bonded‐riveted joints without defects. MXene sensors combined with flexible circuits can form a high‐stability monitoring array. Monitor the mechanical behavior of bonded and riveted areas by the resistance change rate of MXene sensors. Real‐time monitor the micro damage and acceleration changes under the vibration environments.

On-line tensile damage monitoring of WGF/epoxy T-joint by the embedded MWCNT@WGF sensor

Interfacial Strengthening and Self-Monitoring in Carbon Fiber-Reinforced Composites via Carbon Nanotube-Based Damage Sensors

Self-sensing Joints for In-Situ Structural Health Monitoring of Composite Pipes: A Piezoresistive Behavior-Based Method

Mode I Interlaminar Crack Length Prediction by the Resistance Signal of the Integrated MWCNT Sensor in WGF/epoxy Composites During DCB Test

Real-time self-monitoring and smart bend recognizing of fiber-reinforced polymer composites enabled by embedded magnetic fibers

Tensile damage self-monitoring of carbon fiber/epoxy 3D braided composites with electrical resistance method

In Situ Damage Sensing in the Glass Fabric Reinforced Epoxy Composites Containing CNT–Al2O3 Hybrids

In-Situ Monitoring of a Filament Wound Pressure Vessel by the MWCNT Sensor under Hydraulic Fatigue Cycling and Pressurization.

Structural Health Monitoring of Glass Fiber-Reinforced Polymer Laminates with Carbon Nanotube-Coated Glass Fiber Sensing Layer after Low-Velocity Impact Using Electrical Resistance Tomography

Damage evolution monitoring and failure level evaluation of composite bolted joints by MXene/CNTs sensors

A unified investigation into the tensile and compressive sensing performance in highly sensitive MWCNT/epoxy nanocomposite strain sensor through loading-dependent tunneling distance

Large-scale deformation and damage detection of 3D printed continuous carbon fiber reinforced polymer-matrix composite structures

Self-Sensing Of Position-Related Loads In Continuous Carbon Fibers-Embedded 3d-Printed Polymer Structures Using Electrical Resistance Measurement

Damage detection of FRP structures using the electrical resistance response of MWCNTs networks in a PDMS film substrate

Mechanical behavior monitoring of composite hybrid bonded‐riveted joints using high‐stability MXene sensors

Embedding Stretchable, Mesh-Structured Piezoresistive Sensor for In-Situ Damage Detection of Glass Fiber-Reinforced Composite

Monitoring the damage evolution of Al 6061-T6 laser welded T-joint structure using nano-carbon tube based buckypaper film sensor

Mechanical-electrical coupling behaviors of 3-D carbon fiber angle-interlock woven composites under quasi-static and cyclic tension

Tensile strain and damage self-sensing of flax FRP laminates using carbon nanofiber conductive network coupled with acoustic emission

Elastic-Plastic Deformation and Organization Analysis for Ai 7075 Friction Stir Welding Joints Based on Mxene/Swcnt Sensor

Fabrication and characterization of in situ structural health monitoring hybrid continuous carbon/glass fiber–reinforced thermoplastic composite